Navigation API

Formerly known as the app history API

The web's existing history API is problematic for a number of reasons, which makes it hard to use for web applications. This proposal introduces a new API encompassing navigation and history traversal, which is more directly usable by web application developers. Its scope is: initiating navigations, intercepting navigations, and history introspection and mutation.

This new window.navigation API layers on top of the existing API and specification infrastructure, with well-defined interaction points. The main differences are that it is scoped to the current origin and frame, and it is designed to be pleasant to use instead of being a historical accident with many sharp edges.

Summary

The existing history API, including its ability to cause same-document navigations via history.pushState() and history.replaceState(), is hard to deal with in practice, especially for single-page applications. In the best case, developers can work around this with various hacks. In the worst case, it causes user-facing pain in the form of lost state and broken back buttons, or the inability to achieve the desired navigation flow for a web app.

The main problems are:

Managing and introspecting your application's history list, and associated application state, is fragile. State can be lost sometimes (e.g. due to fragment navigations); the browser will spontaneously insert entries due to iframe navigations; and the existing popstate and hashchange events are unreliable. We solve this by providing a view only onto the history entries created directly by the application, and the ability to look at all previous entries for your app so that no state is ever lost.
It's hard to figure out all the ways that navigations can occur, so that an application can synchronize its state or convert those navigations into single-page navigations. We solve this by exposing events that allow the application to observe all navigation actions, and substitute their own behavior in place of the default.
Various parts of the platform, e.g. accessibility technology, the browser's UI, and performance APIs, do not have good visibility into single-page navigations. We solve this by providing a standardized API for telling the browser when a single-page navigation starts and finishes.
Some of the current navigation and history APIs are clunky and hard to understand. We solve this by providing a new interface that is easy for developers to use and understand.

Sample code

An application or framework's centralized router can use the navigate event to implement single-page app routing:

navigation.addEventListener("navigate", e => {
  if (!e.canIntercept || e.hashChange || e.downloadRequest !== null) {
    return;
  }

  if (routesTable.has(e.destination.url)) {
    const routeHandler = routesTable.get(e.destination.url);
    e.intercept({ handler: routeHandler });
  }
});

A page-supplied "back" button can actually take you back, even after reload, by inspecting the previous history entries:

backButtonEl.addEventListener("click", () => {
  if (navigation.entries()[navigation.currentEntry.index - 1]?.url === "/product-listing") {
    navigation.back();
  } else {
    // If the user arrived here by typing the URL directly:
    navigation.navigate("/product-listing", { history: "replace" });
  }
});

Problem statement

Web application developers, as well as the developers of router libraries for single-page applications, want to accomplish a number of use cases related to history:

Intercepting cross-document navigations, replacing them with single-page navigations (i.e. loading content into the appropriate part of the existing document), and then updating the URL bar.
Performing single-page navigations that create and push a new entry onto the history list, to represent a new conceptual history entry.
Navigating backward or forward through the history list via application-provided UI.
Synchronizing application or UI state with the current position in the history list, so that user- or application-initiated navigations through the history list appropriately restore application/UI state.

The existing history API is difficult to use for these purposes. The fundamental problem is that window.history surfaces the joint session history of a browsing session, and so gets updated in response to navigations in nested frames, or cross-origin navigations. Although this view is important for the user, especially in terms of how it impacts their back button, it doesn't map well to web application development. A web application cares about its own, same-origin, current-frame history entries, and having to deal with the entire joint session history makes this very painful. Even in a carefully-crafted web app, a single iframe can completely mess up the application's history.

The existing history API also has a number of less-fundamental, but still very painful, problems around how its API shape has grown organically, with only very slight considerations for single-page app architectures. For example, it provides no mechanism for intercepting navigations; to do this, developers have to intercept all click events, cancel them, and perform the appropriate history.pushState() call. The history.state property is a very bad storage mechanism for application and UI state, as it disappears and reappears as you transition throughout the history list, instead of allowing access to earlier entries in the list. And the ability to navigate throughout the list is limited to numeric offsets, with history.go(-2) or similar; thus, navigating back to an actual specific state requires keeping a side table mapping history indices to application states.

To hear more detail about these problems, in the words of a web developer, see @dvoytenko's "The case for the new Web History API". See also @housseindjirdeh's "History API and JavaScript frameworks".

Goals

Overall, our guiding principle is to make it easy for web application developers to write applications which give good user experiences in terms of the history list, back button, and other navigation UI (such as open-in-new-tab). We believe this is too hard today with the window.history API.

From an API perspective, our primary goals are as follows:

Allow easy conversion of cross-document navigations into single-page app same-document navigations, without fragile hacks like a global click handler.
Improve the accessibility of single-page app navigations (1, 2, 3), ideally to be on par with cross-document navigations, when they are implemented using this API.
Provide a uniform way to signal single-page app navigations, including their duration.
Provide a reliable system to tie application and UI state to history entries.
Continue to support the pattern of allowing the history list to contain state that is not serialized to the URL. (This is possible with history.pushState() today.)
Provide events for notifying the application about navigations and traversals, which they can use to synchronize application or UI state.
Allow metrics code to watch for navigations, including gathering timing information about how long they took, without interfering with the rest of the application.
Provide a way for an application to reliably navigate through its own history list.
Provide a reasonable layering onto and integration with the existing window.history API, in terms of spec primitives and ensuring non-terrible behavior when both are used.

Non-goals:

Allow web applications to intercept user-initiated navigations in a way that would trap the user (e.g., disabling the URL bar or back button).
Provide applications knowledge of cross-origin history entries or state.
Provide applications knowledge of other frames' entries or state.
Provide platform support for the coordination problem of multiple routers (e.g., per-UI-component routers) on a single page. We plan to leave this coordination to frameworks for now (with the frameworks using the new API).
Handle the case where the Android back button is being used as a "close signal"; instead, we believe that's best handled by a separate API.
Provide any handling for preventing navigations that might lose data: this is already handled orthogonally by the platform's beforeunload event.
Provide an elegant layering onto or integration with the existing window.history API. That API is quite problematic, and we can't be tied down by a need to make every operation in the new API isomorphic to one in the old API.

A goal that might not be possible, but we'd like to try:

It would be ideal if this API were polyfillable, especially in its mainline usage scenarios.

Finally, although it's really a goal for all web APIs, we want to call out a strong focus on interoperability, backstopped by web platform tests. The existing history API and its interactions with navigation have terrible interoperability (see this vivid example). We hope to have solid and well-tested specifications for:

Every aspect and self-interaction of the new API
Every aspect of how the new API integrates and interacts with the window.history API (including things like relative timing of events)

Additionally, we hope to drive interoperability through tests, spec updates, and browser bugfixes for the existing window.history API while we're in the area, to the extent that is possible; some of this work is being done in whatwg/html#5767.

Proposal

The current entry

The entry point for the new navigation API is window.navigation. Let's start with navigation.currentEntry, which is an instance of the new NavigationHistoryEntry class. This class has the following readonly properties:

id: a user-agent-generated UUID identifying this particular NavigationHistoryEntry. This will be changed upon any mutation of the current history entry, such as replacing its state or updating the current URL.
key: a user-agent-generated UUID identifying this history entry "slot". This will stay the same even if the entry is replaced.
index: the index of this NavigationHistoryEntry within the (Window- and origin-specific) history entry list. (Or, -1 if the entry is no longer in the list, or not yet in the list.)
url: the URL of this history entry (as a string).
sameDocument: a boolean indicating whether this entry is for the current document, or whether navigating to it will require a full navigation (either from the network, or from the browser's back/forward cache). Note: for navigation.currentEntry, this will always be true.

It also has a method getState(), which retrieve the navigation API state for the entry. This is somewhat similar to history.state, but it will survive fragment navigations, and getState() always returns a fresh clone of the state to avoid the misleading nature of history.state:

navigation.reload({ state: { test: 2 } });

// Don't do this: it won't be saved to the stored state.
navigation.currentEntry.getState().test = 3;

console.assert(navigation.currentEntry.getState().test === 2);

// Instead do this, combined with a `navigate` event handler:
navigation.reload({ state: { ...navigation.currentEntry.getState(), test: 3 } });

Crucially, navigation.currentEntry stays the same regardless of what iframe navigations happen. It only reflects the current entry for the current frame. The complete list of ways the current navigation API history entry can change to a new entry (with a new NavigationHistoryEntry object, and a new key value) are:

A fragment navigation, which will copy over the navigation API state to the new entry.
Via history.pushState(). (Not history.replaceState().)
A full-page navigation to a different document. This could be an existing document in the browser's back/forward cache, or a new document. In the latter case, this will generate a new entry on the new page's window.navigation.entries() list, somewhat similar to navigation.navigate(navigatedToURL, { state: undefined }). Note that if the navigation is cross-origin, then we'll end up in a separate navigation API history entries list for that other origin.
When using the navigate event to convert a cross-document non-replace navigation into a same-document navigation.

The current entry can be replaced with a new entry, with a new NavigationHistoryEntry object and a new id (but usually the same key), in the following ways:

Via history.replaceState().
Via cross-document replace navigations generated by location.replace() or navigation.navigate(url, { history: "replace", ... }). Note that if the navigation is cross-origin, then we'll end up in a separate navigation API history entry list for that other origin, where key will not be preserved.
When using the navigate event to convert a cross-document replace navigation into a same-document navigation.

For any same-document navigation, traversal, or replacement, the currententrychange event will fire on navigation:

navigation.addEventListener("currententrychange", () => {
  // navigation.currentEntry has changed: either to a completely new entry (with a new key),
  // or it has been replaced (keeping the same key but with a new id).
});

Inspection of the history entry list

In addition to the current entry, the entire list of history entries can be inspected, using navigation.entries(), which returns an array of NavigationHistoryEntry instances. (Recall that all navigation API history entries are same-origin contiguous entries for the current frame, so this is not a security issue.)

This solves the problem of allowing applications to reliably store state in a NavigationHistoryEntry's state: because they can inspect the values stored in previous entries at any time, it can be used as real application state storage, without needing to keep a side table like one has to do when using history.state.

Note that we have a method, navigation.entries(), instead of a static array, navigation.entries, to emphasize that retrieving the entries gives you a snapshot at a given point in time. That is, the current set of history entries could change at any point due to manipulations of the history list, including by the user.

In combination with the following section, the entries() API also allows applications to display a UI allowing navigation through the entry list.

Navigation through the history entry list

The way for an application to navigate through the history entry list is using navigation.traverseTo(key). For example:

function renderHomepage() {
  const homepageKey = navigation.currentEntry.key;

  // ... set up some UI ...

  document.querySelector("#home-button").addEventListener("click", async e => {
    try {
      await navigation.traverseTo(homepageKey).finished;
    } catch {
      // Fall back to a normal push navigation
      navigation.navigate("/");
    }
  });
}

Unlike the existing history API's history.go() method, which navigates by offset, traversing by key allows the application to not care about intermediate history entries; it just specifies its desired destination entry. There are also convenience methods, navigation.back() and navigation.forward(), and convenience booleans, navigation.canGoBack and navigation.canGoForward.

All of these methods return { committed, finished } pairs, where both values are promises. This because navigations can be intercepted and made asynchronous by the navigate event handlers that we're about to describe in the next section. There are then several possible outcomes:

A navigate event handler calls event.preventDefault(), in which case both promises reject with an "AbortError" DOMException, and location.href and navigation.currentEntry stay on their original value.
It's not possible to navigate to the given entry, e.g. navigation.traverseTo(key) was given a non-existant key, or navigation.back() was called when there's no previous entries in the list of accessible history entries. In this case, both promises reject with an "InvalidStateError" DOMException, and location.href and navigation.currentEntry stay on their original value.
The navigate event responds to the navigation using event.intercept() with a commit option of "immediate" (the default). In this case the committed promise immediately fulfills, while the finished promise fulfills or rejects according to any promise(s) returned by handlers passed to intercept(). (However, even if the finished promise rejects, location.href and navigation.currentEntry will change.)
The navigate event listener responds to the navigation using event.intercept() with a commit option of "after-transition". In this case the committed promise fulfills and location.href and navigation.currentEntry change when event.commit() is called. The finished promise fulfills or rejects according to any promise(s) returned by handlers passed to intercept(). If a promise returned by a handler rejects before event.commit() is called, then both the committed and finished promises reject and location.href and navigation.currentEntry do not update. If all promise(s) returned by handlers fulfill, but the committed promise has not yet fulfilled, the committed promise will be fulfilled and and location.href and navigation.currentEntry will be updated first, then finished will fulfill.
The navigation succeeds, and was a same-document navigation (but not intercepted using event.intercept()). Then both promises immediately fulfill, and location.href and navigation.currentEntry will have been set to their new value.
The navigation succeeds, and it was a different-document navigation. Then the promise will never settle, because the entire document and all its promises will disappear.

In all cases, the fulfillment value for the promises is the NavigationHistoryEntry being navigated to. This can be useful for setting up per-entry event handlers.

As discussed in more detail in the section on integration with the existing history API and spec, navigating through the navigation API history list does navigate through the joint session history. This means it can impact other frames on the page. It's just that, unlike history.back() and friends, such other-frame navigations always happen as a side effect of navigating your own frame; they are never the sole result of a navigation API traversal. (An interesting consequence of this is that navigation.back() and navigation.forward() are not always opposites.)

Keys and IDs

As noted above, key stays stable to represent the "slot" in the history list, whereas id gets updated whenever the history entry is updated. This allows them to serve distinct purposes:

key provides a stable identifier for a given slot in the history entry list, for use by the navigation.traverseTo() method which allows navigating to specific waypoints within the history list.
id provides an identifier for the specific URL and navigation API state currently in the entry, which can be used to correlate a history entry with an out-of-band resource such as a cache.

With the window.history API, web applications have tried to use the URL for such purposes, but the URL is not guaranteed to be unique within a given history list.

Note that both key and id are user-agent-generated random UUIDs. This is done, instead of e.g. using a numeric index, to encourage treating them as opaque identifiers.

Both key and id are stored in the browser's session history, and as such are stable across session restores.

Note that key is not a stable identifier for a slot in the joint session history list, but instead in the navigation API history entry list. In particular, this means that if a given history entry is replaced with a cross-origin one, which lives in a different navigation API history list, it will get a new key. (This replacement prevents cross-site tracking.)

Navigation monitoring and interception

The most interesting event on window.navigation is the one which allows monitoring and interception of navigations: the navigate event. It fires on almost any navigation, either user-initiated or application-initiated, which would update the value of navigation.currentEntry. This includes cross-origin navigations (which will take us out of the current navigation API history entry list). We expect this to be the main event used by application- or framework-level routers.

The event object has several useful properties:

cancelable (inherited from Event): indicates whether preventDefault() is allowed to cancel this navigation.
canIntercept: indicates whether intercept(), discussed below, is allowed for this navigation.
navigationType: either "reload", "push", "replace", or "traverse".
userInitiated: a boolean indicating whether the navigation is user-initiated (i.e., a click on an <a>, or a form submission) or application-initiated (e.g. location.href = ..., navigation.navigate(...), etc.). Note that this will not be true when you use mechanisms such as button.onclick = () => navigation.navigate(...); the user interaction needs to be with a real link or form. See the table in the appendix for more details.
destination: an object containing the information about the destination of the navigation. It has many of the same properties as a NavigationHistoryEntry: namely url, sameDocument, and getState() for all navigations, and id, key, and index for same-origin "traverse" navigations. (See #97 for discussion as to whether we should add the latter to non-"traverse" same-origin navigations as well.)
hashChange: a boolean, indicating whether or not this is a same-document fragment navigation.
formData: a FormData object containing form submission data, or null if the navigation is not a form submission.
downloadRequest: a string or null, indicating whether this navigation was initiated by a <a href="..." download> link. If it was, then this will contain the value of the attribute (which could be the empty string).
info: any value passed by navigation.navigate(url, { state, info }), navigation.back({ info }), or similar, if the navigation was initiated by one of those methods and the info option was supplied. Otherwise, undefined. See the example below for more.
sourceElement: an Element or null, indicating what element (if any) initiated this navigation. If the navigation was triggered by a link click, the sourceElement will be the <a href="...">. If the navigation was triggered by a form submission, the sourceElement will be the the element that sent the submit event to the form, or if that is null, the <form> being submitted. The sourceElement will also be null when a targeting a different window (e.g., <a href="..." target="otherWindow">).
signal: an AbortSignal which can be monitored for when the navigation gets aborted.

Note that you can check if the navigation will be same-document or cross-document via event.destination.sameDocument, and you can check whether the navigation is to an already-existing history entry (i.e. is a back/forward navigation) via event.navigationType.

The event object has a special method event.intercept(options). This works only under certain circumstances, e.g. it cannot be used on cross-origin navigations. (See below for full details.) It will:

Cancel any fragment navigation or cross-document navigation.
Immediately update the URL bar, location.href, and navigation.currentEntry unless the event.intercept() was called with a commit option of "after-transition".
Create the navigation.transition object.
If options.handler is given, it can be a function that returns a promise. That function will be then be called, and the browser will wait for the returned promise to settle. Once it does, the browser will:
- If the promise rejects, fire navigateerror on navigation and reject navigation.transition.finished.
- If the promise fulfills, fire navigatesuccess on navigation and fulfill navigation.transition.finished.
- Set navigation.transition to null.
For the duration of any such promise settling, any browser loading UI such as a spinner will behave as if it were doing a cross-document navigation.

Note that the browser does not wait for any returned promises to settle in order to update its URL/history-displaying UI (such as URL bar or back button), or to update location.href and navigation.currentEntry, unless a commit option of "after-transition" is provided to event.intercept(). See below for more details.

If intercept() is called multiple times (e.g., by multiple different listeners to the navigate event), then all of the promises returned by any handlers will be combined together using the equivalent of Promise.all(), so that the navigation only counts as a success once they have all fulfilled, or the navigation counts as an error at the point where any of them reject.

In #66, we are discussing adding the capability to delay URL/current entry updates to not happen immediately, as a future extension.

Example: replacing navigations with single-page app navigations

The following is the kind of code you might see in an application or framework's router:

navigation.addEventListener("navigate", e => {
  // Some navigations, e.g. cross-origin navigations, we cannot intercept. Let the browser handle those normally.
  if (!e.canIntercept) {
    return;
  }

  // Don't intercept fragment navigations or downloads.
  if (e.hashChange || e.downloadRequest !== null) {
    return;
  }

  e.intercept({
    handler() {
      if (e.formData) {
        processFormDataAndUpdateUI(e.formData, e.sourceElement, e.signal);
      } else {
        doSinglePageAppNav(e.destination, e.signal);
      }
    }
  });
});

Here, doSinglePageAppNav and processFormDataAndUpdateUI are functions that can return a promise. For example:

async function doSinglePageAppNav(destination, signal) {
  const htmlFromTheServer = await (await fetch(destination.url, { signal })).text();
  document.querySelector("main").innerHTML = htmlFromTheServer;
}

Note how this example responds to various types of navigations:

Cross-origin navigations: let the browser handle it as usual.
Same-document fragment navigations: let the browser handle it as usual.
Same-document URL or state updates (via history.pushState() or history.replaceState()):
1. Send the information about the URL/state update to doSinglePageAppNav(), which will use it to modify the current document.
2. After that UI update is done, potentially asynchronously, notify the app and the browser about the navigation's success or failure.
Cross-document normal navigations (including those via navigation.navigate()):
1. Prevent the browser handling, which would unload the document and create a new one from the network. Instead, immediately change the URL bar/location.href/navigation.currentEntry, while staying on the same document.
2. Send the information about the navigation to doSinglePageAppNav(), which will use it to modify the current document.
3. After that UI update is done, potentially asynchronously, notify the app and the browser about the navigation's success or failure.
Cross-document form submissions:
1. Prevent the browser handling, which would unload the document and create a new one from the network. Instead, immediately change the URL bar/location.href/navigation.currentEntry, while staying on the same document.
2. Send the form data to processFormDataAndUpdateUI(), which will use it to modify the current document.
3. After that UI update is done, potentially asynchronously, notify the app and the browser about the navigation's success or failure.

Notice also how by passing through the AbortSignal found in e.signal, we ensure that any aborted navigations abort the associated fetch as well.

Example: async transitions with special back/forward handling

Sometimes it's desirable to handle back/forward navigations specially, e.g. reusing cached views by transitioning them onto the screen. This can be done by branching as follows:

navigation.addEventListener("navigate", e => {
  // As before.
  if (!e.canIntercept || e.hashChange || e.downloadRequest !== null) {
    return;
  }

  e.intercept({ async handler() {
    if (myFramework.currentPage) {
      await myFramework.currentPage.transitionOut();
    }

    let { key } = e.destination;

    if (e.navigationType === "traverse" && myFramework.previousPages.has(key)) {
      await myFramework.previousPages.get(key).transitionIn();
    } else {
      // This will probably result in myFramework storing the rendered page in myFramework.previousPages.
      await myFramework.renderPage(e.destination);
    }
  } });
});

Example: progressively enhancing form submissions

A common pattern for multi-page web apps is post/redirect/get, which handles POST form submissions by performing a server-side redirect to a page retrieved with GET. This avoids a POST-derived page from ever entering the session history, since this can lead to confusing "Do you want to resubmit the form?" popups and interop problems.

The navigation API's navigate event allows emulating this pattern on the client side using code such as the following:

navigation.addEventListener("navigate", e => {
  const url = new URL(e.destination.url);

  switch (url.pathname) {
    case "/form-submit": {
      e.intercept({ async handler() {
        // Do not navigate to form-submit; instead send the data to that endpoint using fetch().
        await fetch("/form-submit", { body: e.formData });

        // Perform a client-side "redirect" to /destination.
        await navigation.navigate("/destination", { history: "replace" }).finished;
      } });
      break;
    }
    case "/destination": {
      e.intercept({ async handler() {
        document.body.innerHTML = "Form submission complete!";
      } });
      break;
    }
  }
});

Note how doing a replace navigation to /destination overrides the in-progress navigation to /form-submit, so that like in the server-driven approach, the session history ends up going straight from the original page to /destination, with no entry for /form-submit. (This example uses the navigation.navigate() API introduced further down, but you could also do location.replace("/destination") for much the same effect.)

What's cool about this example is that, if the browser does not support the new navigation API, then the server-driven post/redirect/get flow will still go through, i.e. the user will see a full-page navigation that leaves them at /destination. So this is purely a progressive enhancement.

See this interactive demo to check out the technique in action, in browsers with or without the new navigation API implemented.

Restrictions on firing, canceling, and responding

There are many types of navigations a given page can experience; see this appendix for a full breakdown. Some of these need to be treated specially for the purposes of the navigate event.

First, the following navigations will not fire navigate at all:

User-initiated cross-document navigations via non-back/forward browser UI, such as the URL bar, bookmarks, or the reload button
Cross-document navigations initiated from other cross origin windows, e.g. via window.open(url, nameOfYourWindow), or clicking on <a href="..." target="nameOfYourWindow">
document.open(), which can strip off the fragment from the current document's URL

Navigations of the first sort are outside the scope of the webpage, and can never be intercepted or prevented. This is true even if they are to same-origin documents, e.g. if the browser is currently displaying https://example.com/foo and the user edits the URL bar to read https://example.com/bar and presses enter. On the other hand, we do allow the page to intercept user-initiated same-document navigations via browser UI, e.g. if the the browser is currently displaying https://example.com/foo and the user edits the URL bar to read https://example.com/foo#fragment and presses enter. (We do fire a navigate event for browser-UI back/forward buttons; see more discussion below.)

Similarly, cross-document navigations initiated from other windows are not something that can be intercepted today, and for security reasons, we don't want to introduce the ability for your origin to mess with the operation of another origin's scripts. (Even if the purpose of those scripts is to navigate your frame.)

As for document.open(), it is a terrible legacy API with lots of strange side effects, which makes supporting it not worth the implementation cost. Modern sites which use the new navigation API should never be using document.open().

Second, traversals have special restrictions on canceling the navigation via event.preventDefault(). Traversals are:

User-initiated traversals via the browser's back/forward buttons (either same- or cross-document)
Programmatic traversals via history.back()/history.forward()/history.go()
Programmatic traversals via navigation.back()/navigation.forward()/navigation.traverseTo()

Traversals may only be canceled (and event.cancelable will be equal to true) if:

The navigate event is firing in the top window
The traversal is same-document
The traversal was not user-initiated, or there is a consumable activation in the current window.

Allowing cancelation only in the top window is to ensure that there is a single authoritative source for deciding whether or not to cancel the traversal. If all windows were allowed to cancel and a traversal navigated multiple windows, and some canceled but others proceeded, there would not be a good way to keep all windows in sync with the joint session history. Cross-document traversals are uncancelable because of performance concerns. If a cross-document traversal were cancelable, it would need to block before any network requests are sent in order to fire navigate. This is already necessary for beforeunload, but beforeunload is a single-purpose event and if no beforeunload handler is present, the blocking step can be skipped. navigate, on the other hand, is intended to be used for many purposes, and it is wasteful to impose a performance penalty on all cross-document traversals simply because navigate was being used for something unrelated to canceling cross-document navigations. Finally, user activation is required for user-initiated traversals in order to minimize the possibility of trapping: event.preventDefault() on a traversal consumes the user activation, ensuring that the user can always break out of an application that is canceling traversals by, e.g., pressing the browser's back button twice in a row.

By consumable activation, we mean a variant of user activation that we wish to add to the HTML spec. Sticky activation is obviously not correct for preventing trapping the user, because then a single errant click or tap could disable back/forward navigations entirely. However, we are also concerned about using transient activation: it meets our requirement that the user activation can be used once before it is consumed, but the possibility of it expiring due to its transient activation duration elapsing means that web applications may suddenly and unexpectedly get an uncancelable traversal if a back or forward button is pressed and the user happens not to have interacted with the page for a modest period of time. We therefore intend to add a third mode of user activation to the HTML spec, consumable activation, which can be consumed like transient activation, but does not expire based on the transient activation duration.

Because canceling is limited to same-document traversals, no special timing or handler is required for firing navigate; the standard fragment navigation timing just works. If the performance concerns around canceling cross-document traversals were to be resolved at some point in the future, special consideration would need to be given to firing navigate at the correct time in the traversal process (presumably at the same time that beforeunload is fired).

Finally, the following navigations cannot be replaced with same-document navigations by using event.intercept(), and as such will have event.canIntercept equal to false:

Any navigation to a URL which differs in scheme, username, password, host, or port. (I.e., you can only intercept URLs which differ in path, query, or fragment.)
Any cross-document back/forward navigations. Transitioning two adjacent history entries from cross-document to same-document has unpleasant ripple effects on web application and browser implementation architecture.

We'll note that these restrictions allow canceling cross-origin non-back/forward navigations. Although this might be surprising, in general it doesn't grant additional power. That is, web developers can already intercept <a> click events, or modify their code that would set location.href, even if the destination URL is cross-origin.

Measuring standardized single-page navigations

Continuing with the theme of intercept() giving ecosystem benefits beyond just web developer convenience, telling the browser about the start time, duration, end time, and success/failure if a single-page app navigation has benefits for metrics gathering.

In particular, analytics frameworks would be able to consume this information from the browser in a way that works across all applications using the navigation API. See the discussion on performance timeline API integration for what we are proposing there.

This standardized notion of single-page navigations also gives a hook for other useful metrics to build off of. For example, you could imagine variants of the "first-paint" and "first-contentful-paint" APIs which are collected after the navigate event is fired. Or, you could imagine vendor-specific or application-specific measurements like Cumulative Layout Shift or React hydration time being reset after such navigations begin.

This isn't a complete panacea: in particular, such metrics are gameable by bad actors. Such bad actors could try to drive down average measured "load time" by generating excessive navigate events that don't actually do anything. So in scenarios where the web application is less interested in measuring itself, and more interested in driving down specific metrics, those creating the metrics will need to take into account such misuse of the API. Some potential countermeasures against such gaming could include:

Only using the start time of the navigation in creating such metrics, and not using the promise-settling time. This avoids gaming via code such as event.intercept(/* no handler */); await doActualNavigation(); which makes the navigation appear instant to the browser.
Filtering to only count navigations where event.userInitiated is true.
Filtering to only count navigations where the URL changes (i.e., navigation.currentEntry.url !== event.destination.url).
We hope that most analytics vendors will come to automatically track navigate events as page views, and measure their duration. Then, apps using such analytics vendors would have an incentive to keep their page view statistics meaningful, and thus be disincentivized to generate spurious navigations.

Aborted navigations

As shown in the example above, the navigate event comes with an event.signal property that is an AbortSignal. This signal will transition to the aborted state if any of the following occur before any promises returned by handlers passed to intercept() settle:

The user presses their browser's stop button (or similar UI, such as the Esc key).
Another navigation is started, either by the user or programmatically. This includes back/forward navigations, e.g. the user pressing their browser's back button.

The signal will not transition to the aborted state if intercept() is not called. This means it cannot be used to observe the interruption of a cross-document navigation, if that cross-document navigation was left alone and not converted into a same-document navigation by using intercept().

Whether and how the application responds to this abort is up to the web developer. In many cases, such as in the example above, this will automatically work: by passing the event.signal through to any AbortSignal-consuming APIs like fetch(), those APIs will get aborted, and the resulting "AbortError" DOMException propagated from the handler passed to intercept(). But it's possible to ignore it completely, as in the following example:

navigation.addEventListener("navigate", event => {
  event.intercept({ async handler(){
    await new Promise(r => setTimeout(r, 10_000));
    document.body.innerHTML = `Navigated to ${event.destination.url}`;
  } });
});

In this case:

The user pressing the stop button will have no effect, and after ten seconds document.body will get updated anyway with the destination URL of the original navigation.
Navigation to another URL will not prevent the fact that in ten seconds document.body.innerHTML will be updated to show the original destination URL.

Customizations and consequences of navigation interception

Accessibility technology announcements

With cross-document navigations, accessibility technology will announce the start of the navigation, and its completion. But traditionally, same-document navigations (i.e. single-page app navigations) have not been communicated in the same way to accessibility technology. This is in part because it is not clear to the browser when a user interaction causes a single-page navigation, because of the app-specific JavaScript that intermediates between such interactions and the eventual call to history.pushState()/history.replaceState(). In particular, it's unclear exactly when the navigation begins and ends: trying to use the URL change as a signal doesn't work, since when applications call history.pushState() during the content loading process varies.

Any navigation that is intercepted and converted into a single-page navigation using navigateEvent.intercept() will be communicated to accessibility technology in the same way as a cross-document one. Using intercept() serves as a opt-in to this new behavior, and the provided promise allows the browser to know how long the navigation takes, and whether or not it succeeds.

Loading spinners and stop buttons

It is a long-requested feature (see whatwg/fetch#19 and whatwg/html#330) to give pages control over the browser's loading indicator, i.e. the one they show while cross-document navigations are ongoing. This proposal gives the browsers the tools to do this: they can display the loading indicator while any promises returned by handlers passed to navigateEvent.intercept() are settling.

Additionally, in modern browsers, the reload button is replaced with a stop button while such loading is taking place. This can be done for navigation API-intercepted navigations as well, with the result communicated to the developer using navigateEvent.signal.

You can see a demo and screencast of this behavior in Chromium.

Note: specifications do not mandate browser UI, so this is not guaranteed behavior. But it's a nice feature that we hope browsers do end up implementing!

Focus management

Like accessibility technology announcements, focus management currently behaves differently between same-document navigations and cross-document navigations. As this post discusses:

... a user’s keyboard focus point may be kept in the same place as where they clicked, which isn’t intuitive. In layouts where the page changes partially to include a deep-linked modal dialog or other view layer, a user’s focus point could be left in an entirely wrong spot on the page.

The navigation API's navigation interception again gives us the tool to fix this.

By default, any navigation that is intercepted and converted into a single-page navigation using navigateEvent.intercept() will cause focus to reset to the <body> element, or to the first element with the autofocus="" attribute set (if there is one). This focus reset will happen after any promises returned by handlers passed to intercept() settle. However, this focus reset will not take place if the user or developer has manually changed focus while the promise was settling, and that element is still visible and focusable.

This behavior can be customized using intercept()'s focusReset option:

e.intercept({ handler, focusReset: "after-transition" }): the default behavior, described above.
e.intercept({ handler, focusReset: "manual" }): does not reset the focus, and leaves it where it is. (Although, it might get reset anyway if the element is removed from the DOM or similar.) The application will manually manage focus changes.

In general, the default behavior is a best-effort attempt at cross-document navigation parity. But if developers invest some extra work, they can do even better:

Per the above-linked research by Fable Tech Labs, screen reader users generally prefer focus to be reset to a heading or wrapper element, instead of the <body> element. So to get the optimal experience with navigation interception, developers should use autofocus="" appropriately on such elements.
For traversals (i.e. cases where navigateEvent.navigationType === "traverse"), getting parity with the back/forward cache experience requires restoring focus to the same element that was previously focused when that history entry was active. Unfortunately, this isn't something the browser can do automatically for client-side rendered applications; the notion of "the same element" is not generally stable in such cases. So for such cases, using focusReset: "manual", storing some identifier for the currently-focused element in the navigation API state, and calling element.focus() appropriately upon transition could give a better experience, as in the following example:

navigation.addEventListener("navigate", e => {
  const focusedIdentifier = computeIdentifierFor(document.activeElement);
  navigation.updateCurrentEntry({ ...navigation.currentEntry.getState(), focusedIdentifier });

  if (e.canIntercept) {
    const handler = figureOutHandler(e);
    const focusReset = e.navigationType === "traverse" ? "manual" : "after-transition";
    e.intercept({ handler, focusReset });
  }
});

navigation.addEventListener("navigatesuccess", () => {
  if (navigation.transition.navigationType === "traverse") {
    const { focusedIdentifier } = navigation.currentEntry.getState();
    const elementToFocus = findByIdentifier(focusedIdentifier);
    if (elementToFocus) {
      elementToFocus.focus();
    }
  }
});

An additional API that would be helpful, both for cases like these and more generally, would be one for setting and getting the sequential focus navigation start point. Especially for the custom traversals case, this would give even higher-fidelity focus restoration. (But that proposal is separate from the new navigation API.)

We can also extend the focusReset option with other behaviors in the future. Here are a couple which have been proposed, but we are not planning to include in the initial version unless we get strong developer feedback that they would be helpful:

focusReset: "immediate": immediately resets the focus to the <body> element, without waiting for the promise to settle.
focusReset: "two-stage": immediately resets the focus to the <body> element, and then has the same behavior as "after-transition".

Scrolling to fragments and scroll resetting

Note that the discussion in this section applies only to "push" and "replace" navigations. For the behavior for "traverse" and "reload" navigations, see the next section.

When you change the URL with history.pushState()/history.replaceState(), the user's scroll position stays where it is. This is true even if you try to navigate to a fragment, e.g. by doing history.pushState("/article#subheading"). The latter has caused significant pain in client-side router libraries; see e.g. remix-run/react-router#394, or the manual code that is needed to handle this case in Vue, Angular, React Router Hash Link, and others.

With the navigation API, there is a different default behavior, controllable via another option to navigateEvent.intercept():

e.intercept({ handler, scroll: "after-transition" }): the default behavior. After the promise returned by handler fulfills, the browser will attempt to scroll to the fragment given by e.destination.url, or if there is no fragment, it will reset the scroll position to the top of the page (like in a cross-document navigation).
e.intercept({ handler, scroll: "manual" }): the browser will not change the user's scroll position, although you can later perform the same logic manually using e.scroll().

The navigateEvent.scroll() method could be useful if you know you have loaded the element referenced by the hash, or if you know you want to reset the scroll position to the top of the document early, before the full transition has finished. For example:

const freshEntry =
  navigateEvent.navigationType === "push" ||
  navigateEvent.navigationType === "replace";

navigateEvent.intercept({
  scroll: freshEntry ? "manual" : "after-transition",
  async handler() {
    await fetchDataAndSetUpDOM(navigateEvent.url);

    if (freshEntry) {
      navigateEvent.scroll();
    }

    // Note: navigateEvent.scroll() will update what :target points to.
    await fadeInTheScrolledToElement(document.querySelector(":target"));
  },
});

If you want to only perform the scroll-to-a-fragment behavior, and not reset the scroll position to the top if there is no matching fragment, then you can use "manual" combined with only calling navigateEvent.scroll() when (new URL(navigateEvent.destination.url)).hash points to an element that exists.

Scroll position restoration

A common pain point for web developers is scroll restoration during "traverse" and "reload" navigations. The essential problem is that scroll restoration happens unpredictably, and often at the wrong times. For example:

The browser tries to restore the user's scroll position, but the application logic is still setting up the DOM and the relevant elements aren't ready yet.
The browser tries to restore the user's scroll position, but the page's contents have changed and scroll restoration doesn't work that well. (For example, going back to a listing of files in a shared folder, after a different user deleted a bunch of the files.)
The application needs to perform some measurements in order to do a proper transition, but the browser does scroll restoration during the transition, which messes up those measurements. (Demo of this problem: notice how when going back to the grid view, the transition sends the square to the wrong location.)

The same scroll option to navigateEvent.intercept() that we described above for "push" and "replace" navigations, similarly controls scroll restoration for "traverse" and "reload" navigations. And similarly to that case, using intercept() opts you into a more sensible default behavior:

e.intercept({ handler, scroll: "after-transition" }): the default behavior. The browser delays its scroll restoration logic until promise fulfills; it will perform no scroll restoration if the promise rejects. If the user has scrolled during the transition then no scroll restoration will be performed (like for multi-page navs).
e.intercept({ handler, scroll: "manual" }): The browser will perform no automatic scroll restoration. However, the developer can use the e.scroll() API to get semi-automatic scroll restoration, or can use window.scrollTo() or similar APIs to take full control.

For "traverse" and "reload", the navigateEvent.scroll() API performs the browser's scroll restoration logic at the specified time. This allows cases that require precise control over scroll restoration timing, such as a non-broken version of the demo referenced above, to be written like so:

if (navigateEvent.navigationType === "traverse" || navigateEvent.navigationType === "reload") {
  navigateEvent.intercept({
    scroll: "manual",
    async handler() {
      await fetchDataAndSetUpDOM();
      navigateEvent.scroll();
      await measureLayoutAndDoTransition();
    },
  });
}

Some more details on how the navigation API handles scrolling with "traverse" and "reload" navigations:

navigateEvent.scroll() will silently do nothing if called after the user has started scrolling the document.
navigateEvent.scroll() doesn't actually perform a single update of the scroll position. Rather, it puts the page in scroll-position-restoring mode. The scroll position could update several times as more elements load and scroll anchoring kicks in.
By default, any navigations which are intercepted with navigateEvent.intercept() will ignore the value of history.scrollRestoration from the classic history API. This allows developers to use history.scrollRestoration for controlling cross-document scroll restoration, while using the more-granular option to intercept() to control individual same-document navigations.

Precommit handlers

The default behavior of immediately "committing" (i.e., updating location.href and navigation.currentEntry) works well for most situations, but some developers may find they do not want to immediately update the URL, and may want to retain the option of aborting the navigation without needing to rollback a URL update or cancel-and-restart. This behavior can be customized passing a precommitHandler callback alongside or instead of the handler callback:

e.intercept({ handler }): the default behavior, immediately commit the navigation and update location.href and navigation.currentEntry.
e.intercept({ precommitHandler }): start the navigation (e.g., show a loading spinner if the UI has one), but do not immediately commit.

The object passed to intercept can include both a handler and a precommitHandler. If both are included, they are called individually at the appropriate phase.

When precommit handlers are used, the navigation will commit (and a committed promise will resolve if present) once all those handlers are fulfilled.

If a precommitHandler passed to intercept() rejects, then the navigation will be treated as canceled (both committed and finished promises will reject, and no URL update will occur).

Because precommit handlers can be used to cancel the navigation before the URL updates, they are only available when e.cancelable is true. See above for details on when e.cancelable is set to false, and thus precommit handlers are not available. Calling intercept() with a precommitHandler on a non-cancelable event would throw a "SecurityError" DOMException.

Redirects during deferred commit

The precommitHandler callback accepts an argument, which is a controller that can perform certain actions on the precommitted navigation, in particular redirecting. This updates the eventual destination, and potentially the state/info, of the "push" or "replace" navigation. An example usage is as follows:

navigation.addEventListener("navigate", e => {
  e.intercept({
    async precommitHandler(controller) {
      if (await isLoginGuarded(e.destination)) {
        controller.redirect("/login", {state: "login-redirect", info: "some-info"});
      }
    }

    async handler() {
      // apply committed navigation state to document
    }
});
});

This is simpler than the alternative of canceling the original navigation and starting a new one to the redirect location, because it avoids exposing the intermediate state. For example, only one navigatesuccess or navigateerror event fires, and if the navigation was triggered by a call to navigation.navigate(), the promise only fulfills once the redirect destination is reached.

It's possible in the future we could contemplate allowing something similar for { commit: "immediate" } navigations as well. There, we would not be able to hide the intermediate state perfectly, as code would still be able to observe the intermediate location.href values and such. But we could treat such post-commit redirects as special types of replace navigations, which "take over" any promises returned from navigation.navigate(), delay navigatesuccess/navigateerror events, etc.

Transitional time after navigation interception

As part of calling event.intercept() to intercept a navigation and convert it into a single-page navigation, the handlers passed to intercept() can return promises that might not settle for a while. During this transitional time, before the promise settles and the navigatesuccess or navigateerror events fire, an additional API is available, navigation.transition. It has the following properties:

navigationType: either "reload", "push", "replace", or "traverse" indicating what type of navigation this is
from: the NavigationHistoryEntry that was the current one before the transition
finished: a promise which fulfills with undefined when the navigatesuccess event fires on navigation, or rejects with the corresponding error when the navigateerror event fires on navigation

Example: handling failed navigations

To handle failed single-page navigations, i.e. navigations where a promise returned by a handler passed to event.intercept() eventually rejects, you can listen to the navigateerror event and perform application-specific interactions. This event will be an ErrorEvent so you can retrieve the promise's rejection reason. For example, to display an error, you could do something like:

navigation.addEventListener("navigateerror", e => {
  document.body.textContent = `Could not load ${location.href}: ${e.message}`;
  analyticsPackage.send("navigateerror", { stack: e.error.stack });
});

This would give your users an experience most like a multi-page application, where server errors or broken links take them to a dedicated, server-generated error page.

The `navigate()` and `reload()` methods

In a single-page app using window.history, the typical flow is:

Application code triggers a router's navigation infrastructure, giving it a destination URL and possibly additional state or info.
The router updates the URL displayed to the user and visible with location.href, by using history.pushState() or history.replaceState().
The router or its surrounding framework loads the data necessary to render the new URL, and does so.

(Sometimes steps (2) and (3) are switched.) Note in particular the extra care an application needs to take to ensure that all navigations go through the router. This means that they can't easily use traditional APIs like <a> or location.href.

In a single-page app using the new navigation API, instead the router listens to the navigate event. This automatically takes care of step (2), and provides a centralized place for the router and framework to perform step (3). And now the application code can use traditional navigation mechanisms, like <a> or location.href, without any extra code; the browser takes care of sending all of those to the navigate event!

There's one gap remaining, which is the ability to send additional state or info along with a navigation. We solve this by introducing new APIs, navigation.navigate() and navigation.reload(), which can be thought of as an augmented and combined versions of location.assign(), location.replace(), and location.reload(). The non-replace usage of navigation.navigate() is as follows:

// Navigate to a new URL, resetting the state to undefined:
// (equivalent to `location.assign(url)`)
navigation.navigate(url);

// Use a new URL and state.
navigation.navigate(url, { state });

// You can also pass info for the navigate event handler to receive:
navigation.navigate(url, { state, info });

Note how unlike history.pushState(), navigation.navigate() will by default perform a full navigation, e.g. scrolling to a fragment or navigating across documents. Single-page apps will usually intercept these using the navigate event, and convert them into same-document navigations by using event.intercept().

Regardless of whether the navigation gets converted or not, calling navigation.navigate() in this form will clear any future entries in the joint session history. (This includes entries coming from frame navigations, or cross-origin entries: so, it can have an impact beyond just the navigation.entries() list.)

navigation.navigate() also takes a history option, which controls whether the navigation will replace the current history entry in a similar manner to location.replace(). It is used as follows:

// Performs a navigation to the given URL, but replace the current history entry
// instead of pushing a new one.
// (equivalent to `location.replace(url)`)
navigation.navigate(url, { history: "replace" });

// Replace the URL and state at the same time.
navigation.navigate(url, { history: "replace", state });

// You can still pass along info:
navigation.navigate(url, { history: "replace", state, info });

Again, unlike history.replaceState(), navigation.navigate(url, { history: "replace" }) will by default perform a full navigation. And again, single-page apps will usually intercept these using navigate.

There are two other values the history option can take: "auto", which will usually perform a push navigation but will perform a replace navigation under special circumstances (such as when on the initial about:blank document or when navigating to the current URL); and "push", which will always either perform a push navigation or fail if called under those special circumstances. Most developers will be fine either omitting the history option (which has "auto" behavior) or using "replace".

Finally, we have navigation.reload(). This can be used as a replacement for location.reload(), but it also allows passing info and state, which are useful when a single-page app intercepts the reload using the navigate event:

// Just like location.reload().
navigation.reload();

// Leave the state as-is, but pass some info.
navigation.reload({ info });

// Overwrite the state with a new value.
navigation.reload({ state, info });

Note that all of these methods return { committed, finished } promise pairs, as described above for the traversal methods. That is, in the event that the navigations get converted into same-document navigations via event.intercept() in a navigate handler, committed will fulfill immediately, and finished will settle based on the promise returned by the handler (if there is one). This gives your navigation call site an indication of the navigation's success or failure. (If they are non-intercepted fragment navigations, or intercepted navigations with no handler, then finished will fulfill immediately. And if they are non-intercepted cross-document navigations, then the returned promises, along with the entire JavaScript global environment, will disappear as the current document gets unloaded.)

Example: using `info`

The info option to navigation.navigate() gets passed to the navigate event handler as the event.info property. The intended use of this value is to convey transient information about this particular navigation, such as how it happened. In this way, it's different from the persisted value retrievable using event.destination.getState().

One example of how this might be used is to trigger different single-page navigation renderings depending on how a certain route was reached. For example, consider a photo gallery app, where you can reach the same photo URL and state via various routes:

Clicking on it in a gallery view
Clicking "next" or "previous" when viewing another photo in the album
Etc.

Each of these wants a different animation at navigate time. This information doesn't make sense to store in the persistent URL or history entry state, but it's still important to communicate from the rest of the application, into the router (i.e. navigate event handler). This could be done using code such as

document.addEventListener("keydown", e => {
  if (e.key === "ArrowLeft" && hasPreviousPhoto()) {
    navigation.navigate(getPreviousPhotoURL(), { info: { via: "go-left" } });
  }
  if (e.key === "ArrowRight" && hasNextPhoto()) {
    navigation.navigate(getNextPhotoURL(), { info: { via: "go-right" } });
  }
});

photoGallery.addEventListener("click", e => {
  if (e.target.closest(".photo-thumbnail")) {
    navigation.navigate(getPhotoURL(e.target), { info: { via: "gallery", thumbnail: e.target } });
  }
});

navigation.addEventListener("navigate", e => {
  if (isPhotoNavigation(e)) {
    e.intercept({ async handler() {
      switch (e.info.?via) {
        case "go-left": {
          await animateLeft();
          break;
        }
        case "go-right": {
          await animateRight();
          break;
        }
        case "gallery": {
          await animateZoomFromThumbnail(e.info.thumbnail);
          break;
        }
      }

      // TODO: actually load the photo.
    } });
  }
});

Note that in addition to navigation.navigate() and navigation.reload(), the previously-discussed navigation.back(), navigation.forward(), and navigation.traverseTo() methods can also take a info option.

Example: next/previous buttons

Consider trying to code next/previous buttons that perform single-page navigations, for example in a photo gallery application. This has some interesting properties:

If the user presses next five times quickly, you want to be sure to skip them ahead five photos, and not to waste work on the intermediate four.
If the user presses next five times and then previous twice, you want to load the third photo, not wasting work on any others.
If the user presses previous/next and the previous/next item in their history list is the previous/next photo, then you want to just navigate them through the history list, like their browser back and forward buttons.
You'll want to make sure any "permalink" or "share" UI is updated ASAP after such button presses, even if the photo is still loading.

All of this basically "just works" with the navigate event and other parts of the new navigation API. A large part of this is because navigate-event created single-page navigations synchronously update the current URL, and abort any ongoing navigations. The code to handle it would look like the following:

const appState = {
  currentPhoto: 0,
  totalPhotos: 10
};
const next = document.querySelector("button#next");
const previous = document.querySelector("button#previous");
const permalink = document.querySelector("span#permalink");

next.onclick = () => {
  const nextPhotoInHistory = photoNumberFromURL(navigation.entries()[navigation.currentEntry.index + 1]?.url);
  if (nextPhotoInHistory === appState.currentPhoto + 1) {
    navigation.forward();
  } else {
    navigation.navigate(`/photos/${appState.currentPhoto + 1}`);
  }
};

previous.onclick = () => {
  const prevPhotoInHistory = photoNumberFromURL(navigation.entries()[navigation.currentEntry.index - 1]?.url);
  if (nextPhotoInHistory === appState.currentPhoto - 1) {
    navigation.back();
  } else {
    navigation.navigate(`/photos/${appState.currentPhoto - 1}`);
  }
};

navigation.addEventListener("navigate", e => {
  const photoNumber = photoNumberFromURL(e.destination.url);

  if (photoNumber && e.canIntercept) {
    e.intercept({ async handler() {
      // Synchronously update app state and next/previous/permalink UI:
      appState.currentPhoto = photoNumber;
      previous.disabled = appState.currentPhoto === 0;
      next.disabled = appState.currentPhoto === appState.totalPhotos - 1;
      permalink.textContent = e.destination.url;

      // Asynchronously update the photo, passing along the signal so that
      // it all gets aborted if another navigation interrupts us:
      const blob = await (await fetch(`/raw-photos/${photoNumber}.jpg`, { signal: e.signal })).blob();
      const url = URL.createObjectURL(blob);
      document.querySelector("#current-photo").src = url;
    } });
  }
});

function photoNumberFromURL(url) {
  if (!url) {
    return null;
  }

  const result = /\/photos/(\d+)/.exec((new URL(url)).pathname);
  if (result) {
    return Number(result[1]);
  }

  return null;
}

Let's look at our scenarios again:

If the user presses next five times quickly, you want to be sure to skip them ahead five photos, and not to waste work on the intermediate four: this works as intended, as the first four fetches (for photos 1, 2, 3, 4) get aborted via their e.signal, while the last one (for photo 5) completes.
If the user presses next five times and then previous twice, you want to load the third photo, not wasting work on any others: this works as intended, as the first six fetches (for photos 1, 2, 3, 4, 5, 4 again) get aborted via their e.signal, while the last one (for photo 3 again) completes.
If the user presses previous/next and the previous/next item in their history is the previous/next photo, then you want to just navigate them through the history list, like their browser back and forward buttons: this works as intended, due to the if statements inside the click handlers for the next and previous buttons.
You'll want to make sure any "permalink" or "share" UI is updated ASAP after such button presses, even if the photo is still loading: this works as intended, since we can do this work synchronously before loading the photo.

Setting the current entry's state without navigating

We believe that in the majority of cases, single-page apps will be best served by updating their state via navigation.navigate({ state: newState }), which goes through the navigate event. That is, coupling state updates with navigations, which are handled by centralized router code. This is generally superior to the classic history API's model, where state (and URL) updates are done in a way disconnected from navigation, using history.replaceState().

However, there is one type of case where the navigation-centric model doesn't work well. This is when you need to update the current entry's state in response to an external event, often caused by user interaction.

For example, consider a page with expandable/collapsable <details> elements. You want to store the expanded/collapsed state of these <details> elements in your navigation API state, so that when the user traverses back and forward through history, or restarts their browser, your app can read the restored navigation API state and expand the <details> elements appropriately, showing the user what they saw previously.

Creating this experience with navigation.navigate() and the navigate event is awkward. You would need to listen for the <details> element's toggle event, and then do navigation.reload({ state: newState }). And then you would need to have your navigate handler do e.intercept(), and not actually do anything, because the <details> element is already open. This can be made to work, but is not pretty.

For cases like this, where the current history entry's state needs to be updated to capture something that has already happened, we have navigation.updateCurrentEntry({ state: newState }). We would write our above example like so:

detailsEl.addEventListener("toggle", () => {
  navigation.updateCurrentEntry({
    state: { ...navigation.currentEntry.getState(), detailsOpen: detailsEl.open }
  });
});

Another example of this sort of situation is shown in the following section.

Notifications on entry disposal

Each NavigationHistoryEntry has a dispose event, which occurs when that history entry is permanently evicted and unreachable. The most common scenario where this occurs is when doing a push navigation that prunes the forward history, like so:

const startingKey = navigation.currentEntry.key;

const entry1 = await navigation.navigate("/1").committed;
entry1.addEventListener("dispose", () => console.log(1));

const entry2 = await navigation.navigate("/2").committed;
entry2.addEventListener("dispose", () => console.log(2));

const entry3 = await navigation.navigate("/3").committed;
entry3.addEventListener("dispose", () => console.log(3));

await navigation.traverseTo(startingKey).finished;
await navigation.navigate("/1-b").finished;

// Logs 1, 2, 3 as that branch of the tree gets pruned.

This event can be useful for cleaning up any information in secondary stores, such as sessionStorage or caches, when we're guaranteed to never reach those particular history entries again.

Current entry change monitoring

The window.navigation object has an event, currententrychange, which allows the application to react to any updates to the navigation.currentEntry property. This includes both navigations that change its value to a new NavigationHistoryEntry, and calls to APIs like history.replaceState(), navigation.updateCurrentEntry(), or intercepted navigation.navigate(url, { history: "replace", state: newState }) calls that change its state or URL.

Unlike navigate, this event occurs after the navigation is committed. As such, it cannot be intercepted or canceled; it's just an after-the-fact notification.

This event is mainly used for code that want to watch for navigation commits, but are separated from the part of the codebase that actually perform the navigation (since the navigating code can just use navigation.navigate().committed). This is especially useful when migrating from popstate and hashchange, but it could also be used by e.g. analytics packages that don't care about the navigation finishing, just committing. It can also be used to set up relevant per-entry events:

navigation.addEventListener("currententrychange", () => {
  navigation.currentEntry.addEventListener("dispose", genericDisposeHandler);
});

It is best not to use this event as part of the main routing flow of the application, which updates the main content area in response to URL changes. For that, use the navigate event, which provides interception and cancelation support.

The event comes with a property, from, which is the previous value of navigation.currentEntry. It also has a navigationType property, which is either "reload", "push", "replace", "traverse", or null. There are a few interesting cases to consider:

The entry can be the same as before, i.e. navigation.currentEntry === event.from. This happens when navigation.updateCurrentEntry() is called, or when navigation.reload() is converted into a same-document reload. Note that in this case the old state cannot be retrieved, i.e. event.from.getState() will return the current navigation API state.
event.navigationType will be null when navigation.updateCurrentEntry() is called, since that is not a navigation (despite updating navigation.currentEntry).
During traversals, i.e. when event.navigationType is "traverse", you can get the delta by using navigation.currentEntry.index - event.from.index. (Note that this can return NaN in "replace" cases where event.from.index is null.)

Complete event sequence

Between the dispose events, the window.navigation events, and various promises, there's a lot of events floating around. Here's how they all come together:

navigate fires on window.navigation.
If the event is canceled using event.preventDefault(), then:
1. If the process was initiated by a call to a navigation API that returns a promise, then that promise gets rejected with an "AbortError" DOMException.
Otherwise:
1. navigation.transition is created.
2. If event.intercept() was not called, or event.intercept() was called with no commit option, or event.intercept() was called with a commit option of immediate, run the commit steps (see below).
3. Any loading spinner UI starts, if event.intercept() was called.
4. When event.commit() is called, if event.intercept() was called with a commit option of "after-transition", run the commit steps (see below).
5. After all the promises returned by handlers passed to event.intercept() fulfill, or after one microtask if event.intercept() was not called:
  1. If the commit steps (see below) have not run yet, run them now.
  2. navigatesuccess is fired on navigation.
  3. Any loading spinner UI stops.
  4. If the process was initiated by a call to a navigation API that returns a promise, then that promise gets fulfilled.
  5. navigation.transition.finished fulfills with undefined.
  6. navigation.transition becomes null.
6. Alternately, if any of these promises reject:
  1. navigateerror fires on window.navigation with the rejection reason as its error property.
  2. Any loading spinner UI stops.
  3. If the process was initiated by a call to a navigation API that returns a promise, then that promise gets rejected with the same rejection reason.
  4. navigation.transition.finished rejects with the same rejection reason.
  5. navigation.transition becomes null.
7. Alternately, if the navigation gets aborted before either of those two things occur:
  1. navigateerror fires on window.navigation with an "AbortError" DOMException as its error property.
  2. Any loading spinner UI stops. (But potentially restarts, or maybe doesn't stop at all, if the navigation was aborted due to a second navigation starting.)
  3. If the process was initiated by a call to a navigation API that returns a promise, then that promise gets rejected with the same "AbortError" DOMException.
  4. navigation.transition.finished rejects with the same "AbortError" DOMException.
  5. navigation.transition becomes null.
8. One task after firing currententrychange, hashchange and/or popstate fire on window, if applicable. (Note: this can happen before steps (ix)–(xi) if the promises take longer than a single task to settle.)

The commit steps are:

location.href updates.
navigation.currentEntry updates.
currententrychange is fired on navigation.
Any now-unreachable NavigationHistoryEntry instances fire dispose.
The URL bar updates.

Guide for migrating from the existing history API

For web developers using the API, here's a guide to explain how you would replace usage of window.history with window.navigation.

Performing navigations

Instead of using history.pushState(state, "", url), use navigation.navigate(url, { state }) and combine it with a navigate handler to convert the default cross-document navigation into a same-document navigation.

Instead of using history.replaceState(state, "", url), use navigation.navigate(url, { history: "replace", state }), again combined with a navigate handler. Note that if you omit the state value, i.e. if you say navigation.navigate(url, { history: "replace" }), then this will overwrite the entry's state with undefined.

Instead of using history.back() and history.forward(), use navigation.back() and navigation.forward(). Note that unlike the history APIs, the navigation APIs will ignore other frames when determining where to navigate to. This means it might move through multiple entries in the joint session history, skipping over any entries that were generated purely by other-frame navigations.

Also note that if the navigation doesn't have an effect, the navigation traversal methods will return rejected promises, unlike the history traversal methods which silently do nothing. You can detect this as follows:

try {
  await navigation.back().finished;
} catch (e) {
  if (e.name === "InvalidStateError") {
    console.log("We weren't able to go back, because there was nothing previous in the navigation API history entries list");
  }
}

or you can avoid it using the canGoBack property:

if (navigation.canGoBack) {
  await navigation.back().finished;
}

Note that unlike the history APIs, these navigation APIs will not go to another origin. For example, trying to call navigation.back() when the previous document in the joint session history is cross-origin will return a rejected promise, and trigger the console.log() call above.

Instead of using history.go(offset), use navigation.traverseTo(key) to navigate to a specific entry. As with back() and forward(), navigation.traverseTo() will ignore other frames, and will only control the navigation of your frame. If you specifically want to reproduce the pattern of navigating by an offset (not recommended), you can use code such as the following:

const entry = navigation.entries()[navigation.currentEntry.index + offset];
if (entry) {
  await navigation.traverseTo(entry.key).finished;
}

Warning: back/forward are not always opposites

As a consequence of how the new navigation API is focused on manipulating the current frame, navigation.back() followed by navigation.forward() will not always take you back to the original situation, when all the different frames on a page are considered. This sometimes is the case with history.back() and history.forward() today, due to browser bugs. But for the navigation API, it's actually intentional and expected.

This is because of the ambiguity where there can be multiple joint session history entries (representing the history state of the entire frame tree) for a given NavigationHistoryEntry (representing the history state of your particular frame). Consider the following example joint session history where an iframe is involved:

A. https://example.com/outer#1
   ┗ https://example.com/inner-1
B. https://example.com/outer#2
   ┗ https://example.com/inner-1
C. https://example.com/outer#2
   ┗ https://example.com/inner-2
D. https://example.com/outer#2
   ┗ https://example.com/inner-3
E. https://example.com/outer#2
   ┗ https://example.com/inner-4

Let's say the user is looking at joint session history entry C. If code in the outer frame calls navigation.back(), this is a request to navigate backward to the nearest joint session history entry where the outer frame differs, i.e. to navigate to A. Then, if the outer frame in state A calls navigation.forward(), this is a request to navigate forward to the nearest joint session history entry where the outer frame differs, i.e. to navigate to B. So starting at C, a back/forward sequence took us to B.

For similar reasons, if you started at state C, a forward/back sequence in the outer frame would fail (since there is no joint session history entry past C that differs for the outer frame). But a back/forward sequence would succeed, and take you to B per the above.

Although this behavior can be a bit counterintuitive, we think it's worth the tradeoff of having navigation.back() and navigation.forward() predictably navigate your own frame, instead of sometimes only navigating some subframe (like history.back() and history.forward() can do).

In the longer term, we think the best fix for this would be to introduce a mode for iframes where they don't mess with the joint session history at all. If a page used that on all its iframes, then it would never have to worry about such strange behavior.

Using `navigate` handlers

Many cases which use history.pushState() today can just be deleted when using navigation. This is because if you have a listener for the navigate event on navigation, that listener can use event.intercept() to transform navigations that would normally be new-document navigations into same-document navigations. So for example, instead of

<a href="/about">About us</a>
<button onclick="doStuff()">Do stuff</a>

<script>
window.doStuff = async () => {
  await doTheStuff();
  document.querySelector("main").innerHTML = await loadContentFor("/success-page");
  history.pushState(undefined, undefined, "/success-page");
};

document.addEventListener("click", async e => {
  if (e.target.localName === "a" && shouldBeSinglePageNav(e.target.href)) {
    e.preventDefault();
    document.querySelector("main").innerHTML = await loadContentFor(e.target.href);
    history.pushState(undefined, undefined, e.target.href);
  }
});
</script>

you could instead use a navigate handler like so:

<a href="/about">About us</a>
<button onclick="doStuff()">Do stuff</a>

<script>
window.doStuff = async () => {
  await doTheStuff();
  location.href = "/success-page"; // or navigation.navigate("/success-page")
};

navigation.addEventListener("navigate", e => {
  if (shouldBeSinglePageNav(e.destination.url)) {
    e.intercept({ async handler() {
      document.querySelector("main").innerHTML = await loadContentFor(e.destination.url);
    } });
  }
});
</script>

Note how in this case we don't need to use navigation.navigate(), even though the original code used history.pushState().

Attaching and using history state

To update the current entry's state, instead of using history.replaceState(newState), either:

Use navigation.reload({ state: newState }), combined with a navigate handler to convert the cross-document navigation into a same-document one and update the document appropriately, if your state update is meant to drive a page update.
Use navigation.updateCurrentEntry({ state: newState }), if your state update is meant to capture something that's already happened to the page.

To create a new entry with the same URL but a new state value, instead of using history.pushState(newState), use navigation.navigate(navigation.currentEntry.url, { state: newState }), again combined with a navigate handler.

To read the current entry's state, instead of using history.state, use navigation.currentEntry.getState(). Note that this will give a clone of the state, so you cannot set properties on it: to update state, see above.

In general, state in the window.navigation API is expected to be more useful than state in the window.history API, because:

It can be introspected even for the non-current entry, e.g. using navigation.entries()[i].getState().
It is not erased by navigations that are not under the developer's control, such as fragment navigations (for which the state is copied over) and iframe navigations (which don't affect the navigation API history entry list).

This means that the patterns that are often necessary to reliably store application and UI state with window.history, such as maintaining a side-table or using sessionStorage, should not be necessary with window.navigation.

Introspecting the history list

To see how many history entries are in the navigation API history entry list, use navigation.entries().length, instead of history.length. However, note that the semantics are different: navigation API history entries only include same-origin contiguous entries for the current frame, and so that this doesn't reflect the history before the user arrived at the current origin, or the history of iframes. We believe this will be more useful for the patterns that people want in practice.

The navigation API allows introspecting all entries in its history entry list, using navigation.entries(). This should replace some of the workarounds people use today with the window.history API for getting a sense of the history list, e.g. as described in whatwg/html#2710.

Finally, note that history.length is highly non-interoperable today, in part due to the complexity of the joint session history model, and in part due to historical baggage. navigation's less complex model, and the fact that it will be developed in the modern era when there's a high focus on ensuring interoperability through web platform tests, means that using it should allow developers to avoid cross-browser issues with history.length.

Watching for navigations

Today there are two events related to navigations, hashchange and popstate, both on Window. These events are quite problematic and hard to use; see, for example, whatwg/html#5562 or other open issues for some discussion. MDN's fourteen-step guide to "When popstate is sent", which doesn't even match any browsers, is also indicative of the problem.

The new navigation API provides several replacements that subsume these events:

To react to and potentially intercept navigations before they complete, use the navigate event on navigation. See the Navigation monitoring and interception section for more details, including how the event object provides useful information that can be used to distinguish different types of navigations.
To react to navigations that have finished, including any asynchronous work, use the navigatesuccess or navigateerror events on navigation. Note that these will only be fired after any promises returned by handlers passed to the navigate event's event.intercept() method have settled.
To react to navigations that have committed (but not necessarily yet finished), use the currententrychange event on navigation. This is the most direct counterpart to popstate and hashchange, so might be easiest to use as part of an initial migration while your app is adapting to a navigate event-centric paradigm.
To watch a particular entry to see when it becomes unreachable, use that NavigationHistoryEntry's dispose event.

Integration with the existing history API and spec

At a high level, the new navigation API is meant to be a layer on top of the HTML Standard's existing concepts. It does not require a novel model for session history, either in implementations or specifications. (Although, it will only be possible to specify it rigorously once the existing specification gets cleaned up, per the work we're doing in whatwg/html#5767.)

This is done through:

Ensuring that navigation API NavigationHistoryEntrys map directly to the specification's existing history entries. (See the next section.)
Ensuring that traversal through the history via the new navigation API always maps to a traversal through the joint session history, i.e. a traversal which is already possible today.

Correspondence with session history entries

A NavigationHistoryEntry corresponds directly to a session history entry from the existing HTML specification. However, not every session history entry would have a corresponding NavigationHistoryEntry in a given Window: NavigationHistoryEntry objects only exist for session history entries which are same-origin to the current one, and contiguous within that frame.

Example: if a browsing session contains session history entries with the URLs

1. https://example.com/foo
2. https://example.com/bar
3. https://other.example.com/whatever
4. https://example.com/baz

then, if the current entry is 4, there would only be one NavigationHistoryEntry in navigation.entries(), corresponding to 4 itself. If the current entry is 2, then there would be two NavigationHistoryEntrys in navigation.entries(), corresponding to 1 and 2.

To make this correspondence work, every spec-level session history entry would gain three new fields:

key, containing a browser-generated UUID. This is what backs historyEntry.key.
id, containing a browser-generated UUID. This is what backs historyEntry.id.
navigation API state, containing a JavaScript value. This is what backs historyEntry.getState().

Note that the "navigation API state" field has no interaction with the existing "serialized state" field, which is what backs history.state. This route was chosen for a few reasons:

The desired semantics of navigation API state is that it be carried over on fragment navigations, whereas history.state is not carried over. (This is a hard blocker.)
A clean separation can help when a page contains code that uses both window.history and window.navigation. That is, it's convenient that existing code using window.history does not inadvertently mess with new code that does state management using window.navigation.
Today, the serialized state of a session history entry is only exposed when that entry is the current one. The navigation API exposes historyEntry.getState() for all entries in navigation.entries(). This is not a security issue since all navigation API history entries are same-origin contiguous, but if we exposed the serialized state value even for non-current entries, it might break some assumptions of existing code.
Switching to a separate field, accessible only via the getState() method, avoids the mutability problems discussed in #36. If the object was shared with history.state, those problems would be carried over.

Apart from these new fields, the session history entries which correspond to NavigationHistoryEntry objects will continue to manage other fields like document, scroll restoration mode, scroll position data, and persisted user state behind the scenes, in the usual way. The serialized state and browsing context name fields would continue to work if they were set or accessed via the usual APIs, but they don't have any manifestation inside the navigation APIs, and will be left as null by applications that avoid window.history and window.name.

TODO: should we allow global control over the default scroll restoration mode, like history.scrollRestoration gives? That API has legitimate use cases, and we'd like to allow people to never touch window.history... Discuss in #67.

Correspondence with the joint session history

The view of history which the user sees, and which is traversable with existing APIs like history.go(), is the joint session history.

Unlike the view of history presented by window.history, window.navigation only gives a view onto session history entries for the current browsing session. This view does not present the joint session history, i.e. it is not impacted by frames. Notably, this means navigation.entries().length is likely to be quite different from history.length.

Example: consider the following setup.

https://example.com/start loads.
The user navigates to https://example.com/outer by clicking a link. This page contains an iframe with https://example.com/inner-start.
Code on https://example.com/outer calls history.pushState(null, "", "/outer-pushed").
The iframe navigates to https://example.com/inner-end.

The joint session session history contains four entries:

A. https://example.com/start
B. https://example.com/outer
   ┗ https://example.com/inner-start
C. https://example.com/outer-pushed
   ┗ https://example.com/inner-start
D. https://example.com/outer-pushed
   ┗ https://example.com/inner-end

The navigation API history entry list (which also matches the existing spec's frame-specific "session history") for the outer frame looks like:

O1. https://example.com/start        (associated to A)
O2. https://example.com/outer        (associated to B)
O3. https://example.com/outer-pushed (associated to C and D)

The navigation API history entry list for the inner frame looks like:

I1. https://example.com/inner-start  (associated to B and C)
I2. https://example.com/inner-end    (associated to D)

Traversal operates on the joint session history, which means that it's possible to impact other frames. Continuing with our previous setup, and assuming the current entry in the joint session history is D, then:

If code in the outer frame calls navigation.back(), this will take us back to O2, and thus take the joint session history back to B. This means the inner frame will be navigated from /inner-end to /inner-start, changing its current navigation API NavigationHistoryEntry from I2 to I1.
If code in the inner frame calls navigation.back(), this will take us back to I1, and take the joint session history back to C. (This does not impact the outer frame.) The rule here for choosing C, instead of B, is that it moves the joint session history the fewest number of steps necessary to make I1 active.
If code in either the inner frame or the outer frame calls history.back(), this will take the joint session history back to C, and thus update the inner frame's current navigation API NavigationHistoryEntry from I2 to I1. (There is no impact on the outer frame.)

Integration with navigation

To understand when navigation interception interacts with the existing navigation spec, see the navigation types appendix. In cases where interception is allowed and takes place, it is essentially equivalent to preventing the normal navigation and instead synchronously performing the URL and history update steps.

The way in which navigation interacts with session history entries generally is not meant to change; the correspondence of a session history entry to a NavigationHistoryEntry does not introduce anything novel there.

Impact on the back button and user agent UI

The navigation API doesn't change anything about how user agents implement their UI: it's really about developer-facing affordances. Users still care about the joint session history, and so that will continue to be presented in UI surfaces like holding down the back button. Similarly, pressing the back button will continue to navigate through the joint session history, potentially across origins and out of the current navigation API history list (into a new navigation API history list, on the new origin). The design discussed in the previous section ensures that the navigation API cannot get the browser into a strange novel state that has not previously been seen in the joint session history.

One consequence of this is that when iframes are involved, the back button may navigate through the joint session history, without changing the current navigation API NavigationHistoryEntry. This is because, for the most part, the behavior of the back button is the same as that of history.back(), which as the previous section showed, only impacts one frame (and thus one navigation API history entry list) at a time.

Finally, note that user agents can continue to refine their mapping of UI to joint session history to give a better experience. For example, in some cases user agents today have the back button skip joint session history entries which were created without user interaction. We expect this heuristic would continue to be applied for same-document entries generated by intercepting the navigate event, just like it is for today's history.pushState().

Security and privacy considerations

Privacy-wise, this feature is neutral, due to its strict same-origin contiguous entry scoping. That is, it only exposes information which the application already has access to, just in a more convenient form. The storage of navigation API state in the NavigationHistoryEntrys is a convenience with no new privacy concerns, since that state is only accessible same-origin; that is, it provides the same power as something like sessionStorage or history.state.

One particular point of interest is the user-agent generated historyEntry.key and historyEntry.id fields, which are a user-agent-generated random UUIDs. Here again the strict same-origin contiguous entry scoping prevents them from being used for cross-site tracking or similar. Specifically:

These UUIDs lives only for the duration of that navigation API history entry, which is at most for the lifetime of the browsing session. For example, opening a new tab (or iframe) to the same URL will generate different key and id values. So it is not a stable user-specific identifier.
This information is not accessible across sites, as a given navigation API history entry is specific to a frame and origin. That is, cross-site pages will always have different key and id values for all NavigationHistoryEntrys they can examine; there is no way to use history entry keys and IDs to correlate users.

(Collaborating cross-origin same-site pages can inspect each other's NavigationHistoryEntrys using document.domain, but they can also inspect every other aspect of each others' global objects.)

Security-wise, this feature has been carefully designed to give no new abilities that might be disruptive to the user or to delicate parts of browser code. See, for example, the restrictions on navigation monitoring and interception to ensure that it does not allow trapping the user, or the discussion of how this proposal does not impact how browser UI presents session history.

In particular, note that navigation interception can only update the URL bar to perform single-page app navigations to the same extent as history.pushState() does: the destination URL must only differ from the page's current URL in path, query, or fragment components. Thus, the navigate event does not allow URL spoofing by updating the URL bar to a cross-origin destination while providing your own origin's content.

See also the W3C TAG security and privacy questionnaire answers. We also have a corresponding specification section, which largely restates the points here but with links to specification concepts instead of explainer sections.

Future extensions

More per-entry events

We've heard some use cases for additional events on NavigationHistoryEntry objects, in addition to the dispose event. Currently we're thinking of adding navigateto and navigatefrom events.

We expect these would mostly be used by decentralized parts of the application's codebase, such as components, to synchronize their state with the history list. Unlike the navigate event, these events are not cancelable. They are used only for reacting to changes, not intercepting or preventing navigations.

For example, consider a photo gallery application. One way of implementing this would be to store metadata about the photo in the corresponding NavigationHistoryEntry's state. This might look something like this:

async function showPhoto(photoId) {
  // In our app, the `navigate` handler will take care of actually showing the photo and updating the content area.
  const entry = await navigation.navigate(`/photos/${photoId}`, { state: {
    dateTaken: null,
    caption: null
  } }).committed;

  // When we navigate away from this photo, save any changes the user made.
  entry.addEventListener("navigatefrom", e => {
    navigation.updateCurrentEntry({
      state: {
        dateTaken: document.querySelector("#photo-container > .date-taken").value,
        caption: document.querySelector("#photo-container > .caption").value
      }
    });
  });

  // If we ever navigate back to this photo, e.g. using the browser back button or
  // navigation.traverseTo(), restore the input values.
  entry.addEventListener("navigateto", e => {
    const { dateTaken, caption } = entry.getState();
    document.querySelector("#photo-container > .date-taken").value = dateTaken;
    document.querySelector("#photo-container > .caption").value = caption;
  });
}

Note how we use the fulfillment value of the committed promise to get a handle to the entry. This is more robust than assuming navigation.currentEntry is correct, in edge cases where one navigation can interrupt another.

Performance timeline API integration

The performance timeline API provides a generic framework for the browser to signal about interesting events, their durations, and their associated data via PerformanceEntry objects. For example, cross-document navigations are done with the navigation timing API, which uses a subclass of PerformanceEntry called PerformanceNavigationTiming.

It is not currently possible to measure such data for same-document navigations. This is somewhat understandable, as such navigations have always been "zero duration": they occur instantaneously when the application calls history.pushState() or history.replaceState(). So measuring them isn't that interesting. But with the new navigation API, browsers know about the start time, end time, and duration of the navigation, so we can give useful performance entries.

We propose adding new PerformanceEntry instances for such same-document navigations. They would be instances of a new subclass, SameDocumentNavigationEntry, with the following properties:

name: the URL being navigated to. (The use of name instead of url is strange, but matches all the other PerformanceEntrys on the platform.)
entryType: always "same-document-navigation".
startTime: the time at which the navigation was initiated, i.e. when the corresponding API was called (like location.href or navigation.navigate()), or when the user activated the corresponding <a> element, or submitted the corresponding <form>.
duration: the duration of the navigation, which is either 0 for history.pushState()/history.replaceState(), or is the duration it takes the promises returned by handlers passed to event.intercept() to settle, for navigations intercepted by a navigate event handler.
success: false if any of those promises rejected; true otherwise (including for history.pushState()/history.replaceState()).

To record single-page navigations using PerformanceObserver, web developers could then use code such as the following:

const observer = new PerformanceObserver(list => {
  for (const entry of list.getEntries()) {
    analyticsPackage.send("same-document-navigation", entry.toJSON());
  }
});
observer.observe({ type: "same-document-navigation" });

More

Check out the addition label on our issue tracker to see more proposals we've thought about!

Stakeholder feedback

W3C TAG: w3ctag/design-reviews#605
Browser engines:
- Chromium: Prototyping behind a flag
- Gecko: Some non-official positive feedback and continued collaboration
- WebKit: No feedback so far
Web developers: Generally positive; see e.g. reactions and replies to WICG/proposals#20, or the participation on this repository's issue tracker.

Acknowledgments

This proposal is based on an earlier revision by @tbondwilkinson, which outlined all the same capabilities in a different form. It also incorporates the ideas from philipwalton@'s navigation event proposal.

Thanks also to @annevk, @atscott, @chrishtr, @csreis, @dvoytenko, @esprehn, @fabiancook, @frehner, @housseindjirdeh, @jakearchibald, @matt-buland-sfdc, @MelSumner, @mmocny, @natechapin, @posva, @pshrmn, @SetTrend, @slightlyoff, @smaug----, @torgo, and @Yay295 for their help in exploring this space and providing feedback.

Appendix: types of navigations

The web platform has many ways of initiating a navigation. For the purposes of the new navigation API, the following is intended to be a comprehensive list:

Users can trigger navigations via browser UI, including (but not necessarily limited to):
- The URL bar
- The back and forward buttons
- The reload button
- Bookmarks
<a> and <area> elements (both directly by users, and programmatically via element.click() etc.)
<form> elements (both directly by users, and programmatically via element.submit() etc.)
As a special case of the above, the target="nameOfSomeWindow" attribute on <a>, <area>, and <form> will navigate a window whose window.name is nameOfSomeWindow
<meta http-equiv="refresh">
The Refresh HTTP response header
The window.location setter, the various location.* setters, and the location.replace(), location.assign(), and location.reload() methods. Note that these can be called from other frames, including cross-origin ones.
Calling window.open(url, nameOfSomeWindow) will navigate a window whose window.name is nameOfSomeWindow
history.back(), history.forward(), and history.go()
history.pushState() and history.replaceState()
navigation.back(), navigation.forward(), navigation.traverseTo()
navigation.navigate(), navigation.reload()
document.open()

Cross-document navigations are navigations where, after the navigation completes, you end up in a different Document object than the one you are curently on. Notably, these unload the old document, and stop running any JavaScript code from there.

Same-document navigations are ones where, after the navigation completes, you stay on the same Document, with the same JavaScript environment.

Most navigations are cross-document navigations. Same-document navigations can happen due to:

Any of the above navigation mechanisms only updating the URL's fragment, e.g. location.hash = "foo" or clicking on <a href="#bar"> or calling history.back() after either of those two actions
history.pushState() and history.replaceState()
document.open()
Intercepting a cross-document navigation using the navigation object's navigate event, and calling event.intercept()

Here's a summary table:

Trigger	Cross- vs. same-document	Fires `navigate`?	`e.userInitiated`	`e.cancelable`	`e.canIntercept`
Browser UI (back/forward)	Either	Yes	Yes	Yes ❖	Yes †*
Browser UI (non-back/forward fragment change only)	Same	Yes	Yes	Yes	Yes
Browser UI (non-back/forward other)	Cross	No	—	—	—
`<a>`/`<area>`/`<form>` (`target="_self"` or no `target=""`)	Either	Yes	Yes ‡	Yes	Yes *
`<a>`/`<area>`/`<form>` (non-`_self` `target=""`)	Either	Yes Δ	Yes ‡	Yes	Yes *
`<meta http-equiv="refresh">`	Either ◊	Yes	No	Yes	Yes *
`Refresh` header	Either ◊	Yes	No	Yes	Yes *
`window.location`	Either	Yes Δ	No	Yes	Yes *
`history.{back,forward,go}()`	Either	Yes	No	Yes ❖	Yes †*
`history.{pushState,replaceState}()`	Same	Yes	No	Yes	Yes
`navigation.{back,forward,traverseTo}()`	Either	Yes	No	Yes ❖	Yes †*
`navigation.navigate()`	Either	Yes	No	Yes	Yes *
`navigation.reload()`	Cross	Yes	No	Yes	Yes
`window.open(url, "_self")`	Either	Yes	No	Yes	Yes *
`window.open(url, name)`	Either	Yes Δ	No	Yes	Yes *
`document.open()`	Same	No	—	—	—

† = No if cross-document
‡ = No if triggered via, e.g., element.click()
* = No if the URL differs from the page's current one in components besides path/query/fragment, or is cross-origin from the current page and differs in any component besides fragment.
Δ = No if cross-document and initiated from a cross origin-domain window, e.g. frames['cross-origin-frame'].location.href = ... or <a target="cross-origin-frame">
◊ = fragment navigations initiated by <meta http-equiv="refresh"> or the Refresh header are only same-document in some browsers: whatwg/html#6451
❖ = Only in the top window, if the traversal is same-origin, and either the traversal is not user-initiated, or there is a consumable user activation in the current window.

See the discussion on restrictions to understand the reasons why the last few columns are filled out in the way they are.

As a final note, we only fire the navigate event when navigating to URLs that have a fetch scheme. Notably, this excludes navigations to javascript: URLs.

Spec details: the above comprehensive list does not fully match when the HTML Standard's navigate algorithm is called. In particular, HTML does not handle non-fragment-related same-document navigations through the navigate algorithm; instead it uses the URL and history update steps for those. Also, HTML calls the navigate algorithm for the initial loads of new browsing contexts as they transition from the initial about:blank; we avoid firing navigate for those since the initial about:blank is such a weird case in general.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!