title	description	ms.date
F# code formatting guidelines	Learn guidelines for formatting F# code.	10/02/2025

F# code formatting guidelines

This article offers guidelines for how to format your code so that your F# code is:

More legible
In accordance with conventions applied by formatting tools in Visual Studio Code and other editors
Similar to other code online

See also Coding conventions and Component design guidelines, which also covers naming conventions.

Automatic code formatting

The Fantomas code formatter is the F# community standard tool for automatic code formatting. The default settings correspond to this style guide.

We strongly recommend the use of this code formatter. Within F# teams, code formatting specifications should be agreed and codified in terms of an agreed settings file for the code formatter checked into the team repository.

General rules for formatting

F# uses significant white space by default and is white space sensitive. The following guidelines are intended to provide guidance as to how to juggle some challenges this can impose.

Use spaces not tabs

When indentation is required, you must use spaces, not tabs. F# code doesn't use tabs, and the compiler will give an error if a tab character is encountered outside a string literal or comment.

Use consistent indentation

When indenting, at least one space is required. Your organization can create coding standards to specify the number of spaces to use for indentation; two, three, or four spaces of indentation at each level where indentation occurs is typical.

We recommend four spaces per indentation.

That said, indentation of programs is a subjective matter. Variations are OK, but the first rule you should follow is consistency of indentation. Choose a generally accepted style of indentation and use it systematically throughout your codebase.

Avoid formatting that is sensitive to name length

Seek to avoid indentation and alignment that is sensitive to naming:

// ✔️ OK
let myLongValueName =
    someExpression
    |> anotherExpression

// ❌ Not OK
let myLongValueName = someExpression
                      |> anotherExpression

// ✔️ OK
let myOtherVeryLongValueName =
    match
        someVeryLongExpressionWithManyParameters
            parameter1
            parameter2
            parameter3
        with
    | Some _ -> ()
    | ...

// ❌ Not OK
let myOtherVeryLongValueName =
    match someVeryLongExpressionWithManyParameters parameter1
                                                   parameter2
                                                   parameter3 with
    | Some _ -> ()
    | ...

// ❌ Still Not OK
let myOtherVeryLongValueName =
    match someVeryLongExpressionWithManyParameters
              parameter1
              parameter2
              parameter3 with
    | Some _ -> ()
    | ...

The primary reasons for avoiding this are:

Important code is moved far to the right
There's less width left for the actual code
Renaming can break the alignment

Avoid extraneous white space

Avoid extraneous white space in F# code, except where described in this style guide.

// ✔️ OK
spam (ham 1)

// ❌ Not OK
spam ( ham 1 )

Formatting comments

Prefer multiple double-slash comments over block comments.

// Prefer this style of comments when you want
// to express written ideas on multiple lines.

(*
    Block comments can be used, but use sparingly.
    They are useful when eliding code sections.
*)

Comments should capitalize the first letter and be well-formed phrases or sentences.

// ✔️ A good comment.
let f x = x + 1 // Increment by one.

// ❌ two poor comments
let f x = x + 1 // plus one

For formatting XML doc comments, see "Formatting declarations" below.

Formatting expressions

This section discusses formatting expressions of different kinds.

Formatting string expressions

String literals and interpolated strings can just be left on a single line, regardless of how long the line is.

let serviceStorageConnection =
    $"DefaultEndpointsProtocol=https;AccountName=%s{serviceStorageAccount.Name};AccountKey=%s{serviceStorageAccountKey.Value}"

Multi-line interpolated expressions are discouraged. Instead, bind the expression result to a value and use that in the interpolated string.

Formatting tuple expressions

A tuple instantiation should be parenthesized, and the delimiting commas within it should be followed by a single space, for example: (1, 2), (x, y, z).

// ✔️ OK
let pair = (1, 2)
let triples = [ (1, 2, 3); (11, 12, 13) ]

It's commonly accepted to omit parentheses in pattern matching of tuples:

// ✔️ OK
let (x, y) = z
let x, y = z

// ✔️ OK
match x, y with
| 1, _ -> 0
| x, 1 -> 0
| x, y -> 1

It's also commonly accepted to omit parentheses if the tuple is the return value of a function:

// ✔️ OK
let update model msg =
    match msg with
    | 1 -> model + 1, []
    | _ -> model, [ msg ]

In summary, prefer parenthesized tuple instantiations, but when using tuples for pattern matching or a return value, it's considered fine to avoid parentheses.

Formatting application expressions

When formatting a function or method application, arguments are provided on the same line when line-width allows:

// ✔️ OK
someFunction1 x.IngredientName x.Quantity

Omit parentheses unless arguments require them:

// ✔️ OK
someFunction1 x.IngredientName

// ❌ Not preferred - parentheses should be omitted unless required
someFunction1 (x.IngredientName)

// ✔️ OK - parentheses are required
someFunction1 (convertVolumeToLiter x)

Don't omit spaces when invoking with multiple curried arguments:

// ✔️ OK
someFunction1 (convertVolumeToLiter x) (convertVolumeUSPint x)
someFunction2 (convertVolumeToLiter y) y
someFunction3 z (convertVolumeUSPint z)

// ❌ Not preferred - spaces should not be omitted between arguments
someFunction1(convertVolumeToLiter x)(convertVolumeUSPint x)
someFunction2(convertVolumeToLiter y) y
someFunction3 z(convertVolumeUSPint z)

In default formatting conventions, a space is added when applying lower-case functions to tupled or parenthesized arguments (even when a single argument is used):

// ✔️ OK
someFunction2 ()

// ✔️ OK
someFunction3 (x.Quantity1 + x.Quantity2)

// ❌ Not OK, formatting tools will add the extra space by default
someFunction2()

// ❌ Not OK, formatting tools will add the extra space by default
someFunction3(x.IngredientName, x.Quantity)

In default formatting conventions, no space is added when applying capitalized methods to tupled arguments. This is because these are often used with fluent programming:

// ✔️ OK - Methods accepting parenthesize arguments are applied without a space
SomeClass.Invoke()

// ✔️ OK - Methods accepting tuples are applied without a space
String.Format(x.IngredientName, x.Quantity)

// ❌ Not OK, formatting tools will remove the extra space by default
SomeClass.Invoke ()

// ❌ Not OK, formatting tools will remove the extra space by default
String.Format (x.IngredientName, x.Quantity)

These same formatting conventions apply to pattern matching. F# style values consistent formatting:

// ✔️ OK - Consistent formatting for expressions and patterns
let result = Some(value)

match result with
| Some(x) -> x
| None -> 0

You may need to pass arguments to a function on a new line as a matter of readability or because the list of arguments or the argument names are too long. In that case, indent one level:

// ✔️ OK
someFunction2
    x.IngredientName x.Quantity

// ✔️ OK
someFunction3
    x.IngredientName1 x.Quantity2
    x.IngredientName2 x.Quantity2

// ✔️ OK
someFunction4
    x.IngredientName1
    x.Quantity2
    x.IngredientName2
    x.Quantity2

// ✔️ OK
someFunction5
    (convertVolumeToLiter x)
    (convertVolumeUSPint x)
    (convertVolumeImperialPint x)

When the function takes a single multi-line tupled argument, place each argument on a new line:

// ✔️ OK
someTupledFunction (
    478815516,
    "A very long string making all of this multi-line",
    1515,
    false
)

// OK, but formatting tools will reformat to the above
someTupledFunction
    (478815516,
     "A very long string making all of this multi-line",
     1515,
     false)

If argument expressions are short, separate arguments with spaces and keep it in one line.

// ✔️ OK
let person = new Person(a1, a2)

// ✔️ OK
let myRegexMatch = Regex.Match(input, regex)

// ✔️ OK
let untypedRes = checker.ParseFile(file, source, opts)

If argument expressions are long, use newlines and indent one level, rather than indenting to the left-parenthesis.

// ✔️ OK
let person =
    new Person(
        argument1,
        argument2
    )

// ✔️ OK
let myRegexMatch =
    Regex.Match(
        "my longer input string with some interesting content in it",
        "myRegexPattern"
    )

// ✔️ OK
let untypedRes =
    checker.ParseFile(
        fileName,
        sourceText,
        parsingOptionsWithDefines
    )

// ❌ Not OK, formatting tools will reformat to the above
let person =
    new Person(argument1,
               argument2)

// ❌ Not OK, formatting tools will reformat to the above
let untypedRes =
    checker.ParseFile(fileName,
                      sourceText,
                      parsingOptionsWithDefines)

The same rules apply even if there is only a single multi-line argument, including multi-line strings:

// ✔️ OK
let poemBuilder = StringBuilder()
poemBuilder.AppendLine(
    """
The last train is nearly due
The Underground is closing soon
And in the dark, deserted station
Restless in anticipation
A man waits in the shadows
    """
)

Option.traverse(
    create
    >> Result.setError [ invalidHeader "Content-Checksum" ]
)

Formatting pipeline expressions

When using multiple lines, pipeline |> operators should go underneath the expressions they operate on.

// ✔️ OK
let methods2 =
    System.AppDomain.CurrentDomain.GetAssemblies()
    |> List.ofArray
    |> List.map (fun assm -> assm.GetTypes())
    |> Array.concat
    |> List.ofArray
    |> List.map (fun t -> t.GetMethods())
    |> Array.concat

// ❌ Not OK, add a line break after "=" and put multi-line pipelines on multiple lines.
let methods2 = System.AppDomain.CurrentDomain.GetAssemblies()
            |> List.ofArray
            |> List.map (fun assm -> assm.GetTypes())
            |> Array.concat
            |> List.ofArray
            |> List.map (fun t -> t.GetMethods())
            |> Array.concat

// ❌ Not OK either
let methods2 = System.AppDomain.CurrentDomain.GetAssemblies()
               |> List.ofArray
               |> List.map (fun assm -> assm.GetTypes())
               |> Array.concat
               |> List.ofArray
               |> List.map (fun t -> t.GetMethods())
               |> Array.concat

For reverse pipeline <| operators, keep short expressions on a single line. When line length requires wrapping, place arguments on new lines and align them consistently:

// ✔️ OK - short expressions stay on one line
let result = someFunction <| arg1 <| arg2 <| arg3

// ✔️ OK - longer expressions can wrap when necessary
failwith
<| sprintf "A very long error message that exceeds reasonable line length: %s - additional details: %s"
    longVariableName
    anotherLongVariableName

// ✔️ OK - align continuation lines with the operator
let longResult =
    someVeryLongFunctionName
    <| firstVeryLongArgumentName
    <| secondVeryLongArgumentName
    <| thirdVeryLongArgumentName

// ❌ Not OK - unnecessary wrapping of short expressions
failwith <| sprintf "short: %s"
                    value

Formatting lambda expressions

When a lambda expression is used as an argument in a multi-line expression, and is followed by other arguments, place the body of a lambda expression on a new line, indented by one level:

// ✔️ OK
let printListWithOffset a list1 =
    List.iter
        (fun elem ->
             printfn $"A very long line to format the value: %d{a + elem}")
        list1

If the lambda argument is the last argument in a function application, place all arguments until the arrow on the same line.

// ✔️ OK
Target.create "Build" (fun ctx ->
    // code
    // here
    ())

// ✔️ OK
let printListWithOffsetPiped a list1 =
    list1
    |> List.map (fun x -> x + 1)
    |> List.iter (fun elem ->
        printfn $"A very long line to format the value: %d{a + elem}")

Treat match lambda's in a similar fashion.

// ✔️ OK
functionName arg1 arg2 arg3 (function
    | Choice1of2 x -> 1
    | Choice2of2 y -> 2)

When there are many leading or multi-line arguments before the lambda indent all arguments with one level.

// ✔️ OK
functionName
    arg1
    arg2
    arg3
    (fun arg4 ->
        bodyExpr)

// ✔️ OK
functionName
    arg1
    arg2
    arg3
    (function
     | Choice1of2 x -> 1
     | Choice2of2 y -> 2)

If the body of a lambda expression is multiple lines long, you should consider refactoring it into a locally scoped function.

When pipelines include lambda expressions, each lambda expression is typically the last argument at each stage of the pipeline:

// ✔️ OK, with 4 spaces indentation
let printListWithOffsetPiped list1 =
    list1
    |> List.map (fun elem -> elem + 1)
    |> List.iter (fun elem ->
        // one indent starting from the pipe
        printfn $"A very long line to format the value: %d{elem}")

// ✔️ OK, with 2 spaces indentation
let printListWithOffsetPiped list1 =
  list1
  |> List.map (fun elem -> elem + 1)
  |> List.iter (fun elem ->
    // one indent starting from the pipe
    printfn $"A very long line to format the value: %d{elem}")

In case the arguments of a lambda do not fit on a single line, or are multiline themselves, put them on the next line, indented by one level.

// ✔️ OK
fun
    (aVeryLongParameterName: AnEquallyLongTypeName)
    (anotherVeryLongParameterName: AnotherLongTypeName)
    (yetAnotherLongParameterName: LongTypeNameAsWell)
    (youGetTheIdeaByNow: WithLongTypeNameIncluded) ->
    // code starts here
    ()

// ❌ Not OK, code formatters will reformat to the above to respect the maximum line length.
fun (aVeryLongParameterName: AnEquallyLongTypeName) (anotherVeryLongParameterName: AnotherLongTypeName) (yetAnotherLongParameterName: LongTypeNameAsWell) (youGetTheIdeaByNow: WithLongTypeNameIncluded) ->
    ()

// ✔️ OK
let useAddEntry () =
    fun
        (input:
            {| name: string
               amount: Amount
               isIncome: bool
               created: string |}) ->
         // foo
         bar ()

// ❌ Not OK, code formatters will reformat to the above to avoid reliance on whitespace alignment that is contingent to length of an identifier.
let useAddEntry () =
    fun (input: {| name: string
                   amount: Amount
                   isIncome: bool
                   created: string |}) ->
        // foo
        bar ()

Formatting lazy expressions

When writing single-line lazy expressions, keep everything on one line:

// ✔️ OK
let x = lazy (computeValue())

// ✔️ OK  
let y = lazy (a + b)

For multiline lazy expressions, place the opening parenthesis on the same line as the lazy keyword, with the expression body indented one level and the closing parenthesis aligned with the opening:

// ✔️ OK
let v =
    lazy (
        // some code
        let x = computeExpensiveValue()
        let y = computeAnotherValue()
        x + y
    )

// ✔️ OK
let handler =
    lazy (
        let connection = openConnection()
        let data = fetchData connection
        processData data
    )

This follows the same pattern as other function applications with multiline arguments. The opening parenthesis stays with lazy, and the expression is indented one level.

Formatting arithmetic and binary expressions

Always use white space around binary arithmetic expressions:

// ✔️ OK
let subtractThenAdd x = x - 1 + 3

Failing to surround a binary - operator, when combined with certain formatting choices, could lead to interpreting it as a unary -. Unary - operators should always be immediately followed by the value they negate:

// ✔️ OK
let negate x = -x

// ❌ Not OK
let negateBad x = - x

Adding a white-space character after the - operator can lead to confusion for others.

Separate binary operators by spaces. Infix expressions are OK to lineup on same column:

// ✔️ OK
let function1 () =
    acc +
    (someFunction
         x.IngredientName x.Quantity)

// ✔️ OK
let function1 arg1 arg2 arg3 arg4 =
    arg1 + arg2 +
    arg3 + arg4

This rule also applies to units of measures in types and constant annotations:

// ✔️ OK
type Test =
    { WorkHoursPerWeek: uint<hr / (staff weeks)> }
    static member create = { WorkHoursPerWeek = 40u<hr / (staff weeks)> }

// ❌ Not OK
type Test =
    { WorkHoursPerWeek: uint<hr/(staff weeks)> }
    static member create = { WorkHoursPerWeek = 40u<hr/(staff weeks)> }

The following operators are defined in the F# standard library and should be used instead of defining equivalents. Using these operators is recommended as it tends to make code more readable and idiomatic. The following list summarizes the recommended F# operators.

// ✔️ OK
x |> f // Forward pipeline
f <| x // Reverse pipeline
f >> g // Forward composition
x |> ignore // Discard away a value
x + y // Overloaded addition (including string concatenation)
x - y // Overloaded subtraction
x * y // Overloaded multiplication
x / y // Overloaded division
x % y // Overloaded modulus
x && y // Lazy/short-cut "and"
x || y // Lazy/short-cut "or"
x <<< y // Bitwise left shift
x >>> y // Bitwise right shift
x ||| y // Bitwise or, also for working with “flags” enumeration
x &&& y // Bitwise and, also for working with “flags” enumeration
x ^^^ y // Bitwise xor, also for working with “flags” enumeration

Formatting range operator expressions

Only add spaces around the .. when all expressions are non-atomic. Integers and single word identifiers are considered atomic.

// ✔️ OK
let a = [ 2..7 ] // integers
let b = [ one..two ] // identifiers
let c = [ ..9 ] // also when there is only one expression
let d = [ 0.7 .. 9.2 ] // doubles
let e = [ 2L .. number / 2L ] // complex expression
let f = [| A.B .. C.D |] // identifiers with dots
let g = [ .. (39 - 3) ] // complex expression
let h = [| 1 .. MyModule.SomeConst |] // not all expressions are atomic

for x in 1..2 do
    printfn " x = %d" x

let s = seq { 0..10..100 }

// ❌ Not OK
let a = [ 2 .. 7 ]
let b = [ one .. two ]

These rules also apply to slicing:

// ✔️ OK
arr[0..10]
list[..^1]

Formatting if expressions

Indentation of conditionals depends on the size and complexity of the expressions that make them up. Write them on one line when:

cond, e1, and e2 are short.
e1 and e2 are not if/then/else expressions themselves.

// ✔️ OK
if cond then e1 else e2

If the else expression is absent, it's recommended to never write the entire expression in one line. This is to differentiate the imperative code from the functional.

// ✔️ OK
if a then
    ()

// ❌ Not OK, code formatters will reformat to the above by default
if a then ()

If any of the expressions are multi-line, each conditional branch should be multi-line.

// ✔️ OK
if cond then
    let e1 = something()
    e1
else
    e2
    
// ❌ Not OK
if cond then
    let e1 = something()
    e1
else e2

Multiple conditionals with elif and else are indented at the same scope as the if when they follow the rules of the one line if/then/else expressions.

// ✔️ OK
if cond1 then e1
elif cond2 then e2
elif cond3 then e3
else e4

If any of the conditions or expressions is multi-line, the entire if/then/else expression is multi-line:

// ✔️ OK
if cond1 then
    let e1 = something()
    e1
elif cond2 then
    e2
elif cond3 then
    e3
else
    e4

// ❌ Not OK
if cond1 then
    let e1 = something()
    e1
elif cond2 then e2
elif cond3 then e3
else e4

If a condition is multiline or exceeds the default tolerance of the single-line, the condition expression should use one indentation and a new line. The if and then keyword should align when encapsulating the long condition expression.

// ✔️ OK, but better to refactor, see below
if
    complexExpression a b && env.IsDevelopment()
    || someFunctionToCall
        aVeryLongParameterNameOne
        aVeryLongParameterNameTwo
        aVeryLongParameterNameThree 
then
        e1
    else
        e2

// ✔️The same applies to nested `elif` or `else if` expressions
if a then
    b
elif
    someLongFunctionCall
        argumentOne
        argumentTwo
        argumentThree
        argumentFour
then
    c
else if
    someOtherLongFunctionCall
        argumentOne
        argumentTwo
        argumentThree
        argumentFour
then
    d

It is, however, better style to refactor long conditions to a let binding or separate function:

// ✔️ OK
let performAction =
    complexExpression a b && env.IsDevelopment()
    || someFunctionToCall
        aVeryLongParameterNameOne
        aVeryLongParameterNameTwo
        aVeryLongParameterNameThree

if performAction then
    e1
else
    e2

Formatting union case expressions

Applying discriminated union cases follows the same rules as function and method applications. That is, because the name is capitalized, code formatters will remove a space before a tuple:

// ✔️ OK
let opt = Some("A", 1)

// OK, but code formatters will remove the space
let opt = Some ("A", 1)

Like function applications, constructions that split across multiple lines should use indentation:

// ✔️ OK
let tree1 =
    BinaryNode(
        BinaryNode (BinaryValue 1, BinaryValue 2),
        BinaryNode (BinaryValue 3, BinaryValue 4)
    )

Formatting list and array expressions

Write x :: l with spaces around the :: operator (:: is an infix operator, hence surrounded by spaces).

List and arrays declared on a single line should have a space after the opening bracket and before the closing bracket:

// ✔️ OK
let xs = [ 1; 2; 3 ]

// ✔️ OK
let ys = [| 1; 2; 3; |]

Always use at least one space between two distinct brace-like operators. For example, leave a space between a [ and a {.

// ✔️ OK
[ { Ingredient = "Green beans"; Quantity = 250 }
  { Ingredient = "Pine nuts"; Quantity = 250 }
  { Ingredient = "Feta cheese"; Quantity = 250 }
  { Ingredient = "Olive oil"; Quantity = 10 }
  { Ingredient = "Lemon"; Quantity = 1 } ]

// ❌ Not OK
[{ Ingredient = "Green beans"; Quantity = 250 }
 { Ingredient = "Pine nuts"; Quantity = 250 }
 { Ingredient = "Feta cheese"; Quantity = 250 }
 { Ingredient = "Olive oil"; Quantity = 10 }
 { Ingredient = "Lemon"; Quantity = 1 }]

The same guideline applies for lists or arrays of tuples.

Lists and arrays that split across multiple lines follow a similar rule as records do:

// ✔️ OK
let pascalsTriangle =
    [| [| 1 |]
       [| 1; 1 |]
       [| 1; 2; 1 |]
       [| 1; 3; 3; 1 |]
       [| 1; 4; 6; 4; 1 |]
       [| 1; 5; 10; 10; 5; 1 |]
       [| 1; 6; 15; 20; 15; 6; 1 |]
       [| 1; 7; 21; 35; 35; 21; 7; 1 |]
       [| 1; 8; 28; 56; 70; 56; 28; 8; 1 |] |]

As with records, declaring the opening and closing brackets on their own line will make moving code around and piping into functions easier:

// ✔️ OK
let pascalsTriangle =
    [| 
        [| 1 |]
        [| 1; 1 |]
        [| 1; 2; 1 |]
        [| 1; 3; 3; 1 |]
        [| 1; 4; 6; 4; 1 |]
        [| 1; 5; 10; 10; 5; 1 |]
        [| 1; 6; 15; 20; 15; 6; 1 |]
        [| 1; 7; 21; 35; 35; 21; 7; 1 |]
        [| 1; 8; 28; 56; 70; 56; 28; 8; 1 |] 
    |]

If a list or array expression is the right-hand side of a binding, you may prefer to use Stroustrup style:

// ✔️ OK
let pascalsTriangle = [| 
   [| 1 |]
   [| 1; 1 |]
   [| 1; 2; 1 |]
   [| 1; 3; 3; 1 |]
   [| 1; 4; 6; 4; 1 |]
   [| 1; 5; 10; 10; 5; 1 |]
   [| 1; 6; 15; 20; 15; 6; 1 |]
   [| 1; 7; 21; 35; 35; 21; 7; 1 |]
   [| 1; 8; 28; 56; 70; 56; 28; 8; 1 |] 
|]

However, when a list or array expression is not the right-hand side of a binding, such as when it's inside of another list or array, if that inner expression needs to span multiple lines, the brackets should go on their own lines:

// ✔️ OK - The outer list follows `Stroustrup` style, while the inner lists place their brackets on separate lines
let fn a b = [ 
    [
        someReallyLongValueThatWouldForceThisListToSpanMultipleLines
        a
    ]
    [ 
        b
        someReallyLongValueThatWouldForceThisListToSpanMultipleLines 
    ]
]

// ❌ Not okay
let fn a b = [ [
    someReallyLongValueThatWouldForceThisListToSpanMultipleLines
    a
]; [
    b
    someReallyLongValueThatWouldForceThisListToSpanMultipleLines
] ]

The same rule applies for record types inside of arrays/lists:

// ✔️ OK - The outer list follows `Stroustrup` style, while the inner lists place their brackets on separate lines
let fn a b = [ 
    {
        Foo = someReallyLongValueThatWouldForceThisListToSpanMultipleLines
        Bar = a
    }
    { 
        Foo = b
        Bar = someReallyLongValueThatWouldForceThisListToSpanMultipleLines 
    }
]

// ❌ Not okay
let fn a b = [ {
    Foo = someReallyLongValueThatWouldForceThisListToSpanMultipleLines
    Bar = a
}; {
    Foo = b
    Bar = someReallyLongValueThatWouldForceThisListToSpanMultipleLines
} ]

When generating arrays and lists programmatically, prefer -> over do ... yield when a value is always generated:

// ✔️ OK
let squares = [ for x in 1..10 -> x * x ]

// ❌ Not preferred, use "->" when a value is always generated
let squares' = [ for x in 1..10 do yield x * x ]

Older versions of F# required specifying yield in situations where data may be generated conditionally, or there may be consecutive expressions to be evaluated. Prefer omitting these yield keywords unless you must compile with an older F# language version:

// ✔️ OK
let daysOfWeek includeWeekend =
    [
        "Monday"
        "Tuesday"
        "Wednesday"
        "Thursday"
        "Friday"
        if includeWeekend then
            "Saturday"
            "Sunday"
    ]

// ❌ Not preferred - omit yield instead
let daysOfWeek' includeWeekend =
    [
        yield "Monday"
        yield "Tuesday"
        yield "Wednesday"
        yield "Thursday"
        yield "Friday"
        if includeWeekend then
            yield "Saturday"
            yield "Sunday"
    ]

In some cases, do...yield may aid in readability. These cases, though subjective, should be taken into consideration.

Formatting record expressions

Short records can be written in one line:

// ✔️ OK
let point = { X = 1.0; Y = 0.0 }

Records that are longer should use new lines for labels:

// ✔️ OK
let rainbow =
    { Boss = "Jeffrey"
      Lackeys = ["Zippy"; "George"; "Bungle"] }

Multiline bracket formatting styles

For records that span multiple lines, there are three commonly used formatting styles: Cramped, Aligned, and Stroustrup. The Cramped style has been the default style for F# code, as it tends to favor styles that allow the compiler to easily parse code. Both Aligned and Stroustrup styles allow for easier reordering of members, leading to code that may be easier to refactor, with the drawback that certain situations may require slightly more verbose code.

Cramped: The historical standard, and default F# record format. Opening brackets go on the same line as the first member, closing bracket on the same line as the last member.

let rainbow = 
    { Boss1 = "Jeffrey"
      Boss2 = "Jeffrey"
      Boss3 = "Jeffrey"
      Lackeys = [ "Zippy"; "George"; "Bungle" ] }

Aligned: Brackets each get their own line, aligned on the same column.

let rainbow =
    {
        Boss1 = "Jeffrey"
        Boss2 = "Jeffrey"
        Boss3 = "Jeffrey"
        Lackeys = ["Zippy"; "George"; "Bungle"]
    }

Stroustrup: Opening bracket goes on the same line as the binding, closing bracket gets its own line.

let rainbow = {
    Boss1 = "Jeffrey"
    Boss2 = "Jeffrey"
    Boss3 = "Jeffrey"
    Lackeys = [ "Zippy"; "George"; "Bungle" ]
}

The same formatting style rules apply for list and array elements.

Formatting copy-and-update record expressions

A copy-and-update record expression is still a record, so similar guidelines apply.

Short expressions can fit on one line:

// ✔️ OK
let point2 = { point with X = 1; Y = 2 }

Longer expressions should use new lines, and format based on one of the above-named conventions:

// ✔️ OK - Cramped
let newState =
    { state with
        Foo =
            Some
                { F1 = 0
                  F2 = "" } }
        
// ✔️ OK - Aligned
let newState = 
    {
        state with
            Foo =
                Some
                    {
                        F1 = 0
                        F2 = ""
                    }
    }

// ✔️ OK - Stroustrup
let newState = { 
    state with
        Foo =
            Some { 
                F1 = 0
                F2 = ""
            }
}

Note: If using Stroustrup style for copy-and-update expressions, you must indent members further than the copied record name:

// ✔️ OK
let bilbo = {
    hobbit with 
        Name = "Bilbo"
        Age = 111
        Region = "The Shire" 
}

// ❌ Not OK - Results in compiler error: "Possible incorrect indentation: this token is offside of context started at position"
let bilbo = {
    hobbit with 
    Name = "Bilbo"
    Age = 111
    Region = "The Shire" 
}

Formatting pattern matching

Use a | for each clause of a match with no indentation. If the expression is short, you can consider using a single line if each subexpression is also simple.

// ✔️ OK
match l with
| { him = x; her = "Posh" } :: tail -> x
| _ :: tail -> findDavid tail
| [] -> failwith "Couldn't find David"

// ❌ Not OK, code formatters will reformat to the above by default
match l with
    | { him = x; her = "Posh" } :: tail -> x
    | _ :: tail -> findDavid tail
    | [] -> failwith "Couldn't find David"

Pattern matching formatting should be consistent with expression formatting. Do not add a space before the opening parenthesis of pattern arguments:

// ✔️ OK
match x with
| Some(y) -> y
| None -> 0

// ✔️ OK
match data with
| Success(value) -> value
| Error(msg) -> failwith msg

// ❌ Not OK, pattern formatting should match expression formatting
match x with
| Some (y) -> y
| None -> 0

However, do use spaces between separate curried arguments in patterns, just as in expressions:

// ✔️ OK - space between curried arguments
match x with
| Pattern arg (a, b) -> processValues arg a b

// ❌ Not OK - missing space between curried arguments
match x with
| Pattern arg(a, b) -> processValues arg a b

If the expression on the right of the pattern matching arrow is too large, move it to the following line, indented one step from the match/|.

// ✔️ OK
match lam with
| Var v -> 1
| Abs(x, body) ->
    1 + sizeLambda body
| App(lam1, lam2) ->
    sizeLambda lam1 + sizeLambda lam2

Similar to large if conditions, if a match expression is multiline or exceeds the default tolerance of the single-line, the match expression should use one indentation and a new line. The match and with keyword should align when encapsulating the long match expression.

// ✔️ OK, but better to refactor, see below
match
    complexExpression a b && env.IsDevelopment()
    || someFunctionToCall
        aVeryLongParameterNameOne
        aVeryLongParameterNameTwo
        aVeryLongParameterNameThree 
with
| X y -> y
| _ -> 0

It is, however, better style to refactor long match expressions to a let binding or separate function:

// ✔️ OK
let performAction =
    complexExpression a b && env.IsDevelopment()
    || someFunctionToCall
        aVeryLongParameterNameOne
        aVeryLongParameterNameTwo
        aVeryLongParameterNameThree

match performAction with
| X y -> y
| _ -> 0

Aligning the arrows of a pattern match should be avoided.

// ✔️ OK
match lam with
| Var v -> v.Length
| Abstraction _ -> 2

// ❌ Not OK, code formatters will reformat to the above by default
match lam with
| Var v         -> v.Length
| Abstraction _ -> 2

Pattern matching introduced by using the keyword function should indent one level from the start of the previous line:

// ✔️ OK
lambdaList
|> List.map (function
    | Abs(x, body) -> 1 + sizeLambda 0 body
    | App(lam1, lam2) -> sizeLambda (sizeLambda 0 lam1) lam2
    | Var v -> 1)

The use of function in functions defined by let or let rec should in general be avoided in favor of a match. If used, the pattern rules should align with the keyword function:

// ✔️ OK
let rec sizeLambda acc =
    function
    | Abs(x, body) -> sizeLambda (succ acc) body
    | App(lam1, lam2) -> sizeLambda (sizeLambda acc lam1) lam2
    | Var v -> succ acc

Formatting try/with expressions

Pattern matching on the exception type should be indented at the same level as with.

// ✔️ OK
try
    if System.DateTime.Now.Second % 3 = 0 then
        raise (new System.Exception())
    else
        raise (new System.ApplicationException())
with
| :? System.ApplicationException ->
    printfn "A second that was not a multiple of 3"
| _ ->
    printfn "A second that was a multiple of 3"

Add a | for each clause, except when there is only a single clause:

// ✔️ OK
try
    persistState currentState
with ex ->
    printfn "Something went wrong: %A" ex

// ✔️ OK
try
    persistState currentState
with :? System.ApplicationException as ex ->
    printfn "Something went wrong: %A" ex

// ❌ Not OK, see above for preferred formatting
try
    persistState currentState
with
| ex ->
    printfn "Something went wrong: %A" ex

// ❌ Not OK, see above for preferred formatting
try
    persistState currentState
with
| :? System.ApplicationException as ex ->
    printfn "Something went wrong: %A" ex

Formatting named arguments

Named arguments should have spaces surrounding the =:

// ✔️ OK
let makeStreamReader x = new System.IO.StreamReader(path = x)

// ❌ Not OK, spaces are necessary around '=' for named arguments
let makeStreamReader x = new System.IO.StreamReader(path=x)

When pattern matching using discriminated unions, named patterns are formatted similarly, for example.

type Data =
    | TwoParts of part1: string * part2: string
    | OnePart of part1: string

// ✔️ OK
let examineData x =
    match data with
    | OnePartData(part1 = p1) -> p1
    | TwoPartData(part1 = p1; part2 = p2) -> p1 + p2

// ❌ Not OK, spaces are necessary around '=' for named pattern access
let examineData x =
    match data with
    | OnePartData(part1=p1) -> p1
    | TwoPartData(part1=p1; part2=p2) -> p1 + p2

Formatting mutation expressions

Mutation expressions location <- expr are normally formatted on one line. If multi-line formatting is required, place the right-hand-side expression on a new line.

// ✔️ OK
ctx.Response.Headers[HeaderNames.ContentType] <-
    Constants.jsonApiMediaType |> StringValues

ctx.Response.Headers[HeaderNames.ContentLength] <-
    bytes.Length |> string |> StringValues

// ❌ Not OK, code formatters will reformat to the above by default
ctx.Response.Headers[HeaderNames.ContentType] <- Constants.jsonApiMediaType
                                                 |> StringValues
ctx.Response.Headers[HeaderNames.ContentLength] <- bytes.Length
                                                   |> string
                                                   |> StringValues

Formatting object expressions

Object expression members should be aligned with member being indented by one level.

// ✔️ OK
let comparer =
    { new IComparer<string> with
          member x.Compare(s1, s2) =
              let rev (s: String) = new String (Array.rev (s.ToCharArray()))
              let reversed = rev s1
              reversed.CompareTo (rev s2) }

You may also prefer to use Stroustrup style:

let comparer = { 
    new IComparer<string> with
        member x.Compare(s1, s2) =
            let rev (s: String) = new String(Array.rev (s.ToCharArray()))
            let reversed = rev s1
            reversed.CompareTo(rev s2)
}

Empty type definitions may be formatted on one line:

type AnEmptyType = class end

Regardless of the chosen page width, = class end should always be on the same line.

Formatting index/slice expressions

Index expressions shouldn't contain any spaces around the opening and closing brackets.

// ✔️ OK
let v = expr[idx]
let y = myList[0..1]

// ❌ Not OK
let v = expr[ idx ]
let y = myList[ 0 .. 1 ]

This also applies for the older expr.[idx] syntax.

// ✔️ OK
let v = expr.[idx]
let y = myList.[0..1]

// ❌ Not OK
let v = expr.[ idx ]
let y = myList.[ 0 .. 1 ]

Formatting quoted expressions

The delimiter symbols (<@, @>, <@@, @@>) should be placed on separate lines if the quoted expression is a multi-line expression.

// ✔️ OK
<@
    let f x = x + 10
    f 20
@>

// ❌ Not OK
<@ let f x = x + 10
   f 20
@>

In single-line expressions the delimiter symbols should be placed on the same line as the expression itself.

// ✔️ OK
<@ 1 + 1 @>

// ❌ Not OK
<@
    1 + 1
@>

Formatting chained expressions

When chained expressions (function applications intertwined with .) are long, put each application invocation on the next line. Indent the subsequent links in the chain by one level after the leading link.

// ✔️ OK
Host
    .CreateDefaultBuilder(args)
    .ConfigureWebHostDefaults(fun webBuilder -> webBuilder.UseStartup<Startup>())

// ✔️ OK
Cli
    .Wrap("git")
    .WithArguments(arguments)
    .WithWorkingDirectory(__SOURCE_DIRECTORY__)
    .ExecuteBufferedAsync()
    .Task

The leading link can be composed out of multiple links if they are simple identifiers. For example, the addition of a fully qualified namespace.

// ✔️ OK
Microsoft.Extensions.Hosting.Host
    .CreateDefaultBuilder(args)
    .ConfigureWebHostDefaults(fun webBuilder -> webBuilder.UseStartup<Startup>())

Subsequent links should also contain simple identifiers.

// ✔️ OK
configuration.MinimumLevel
    .Debug()
    // Notice how `.WriteTo` does not need its own line.
    .WriteTo.Logger(fun loggerConfiguration ->
        loggerConfiguration.Enrich
            .WithProperty("host", Environment.MachineName)
            .Enrich.WithProperty("user", Environment.UserName)
            .Enrich.WithProperty("application", context.HostingEnvironment.ApplicationName))

When the arguments inside a function application don't fit on the rest of the line, put each argument on the next line.

// ✔️ OK
WebHostBuilder()
    .UseKestrel()
    .UseUrls("http://*:5000/")
    .UseCustomCode(
        longArgumentOne,
        longArgumentTwo,
        longArgumentThree,
        longArgumentFour
    )
    .UseContentRoot(Directory.GetCurrentDirectory())
    .UseStartup<Startup>()
    .Build()

// ✔️ OK
Cache.providedTypes
    .GetOrAdd(cacheKey, addCache)
    .Value

// ❌ Not OK, formatting tools will reformat to the above
Cache
    .providedTypes
    .GetOrAdd(
        cacheKey,
        addCache
    )
    .Value

Lambda arguments inside a function application should start on the same line as the opening (.

// ✔️ OK
builder
    .WithEnvironment()
    .WithLogger(fun loggerConfiguration ->
        // ...
        ())

// ❌ Not OK, formatting tools will reformat to the above
builder
    .WithEnvironment()
    .WithLogger(
        fun loggerConfiguration ->
        // ...
        ())

Formatting declarations

This section discusses formatting declarations of different kinds.

Add blank lines between declarations

Separate top-level function and class definitions with a single blank line. For example:

// ✔️ OK
let thing1 = 1+1

let thing2 = 1+2

let thing3 = 1+3

type ThisThat = This | That

// ❌ Not OK
let thing1 = 1+1
let thing2 = 1+2
let thing3 = 1+3
type ThisThat = This | That

If a construct has XML doc comments, add a blank line before the comment.

// ✔️ OK

/// This is a function
let thisFunction() =
    1 + 1

/// This is another function, note the blank line before this line
let thisFunction() =
    1 + 1

Formatting let and member declarations

When formatting let and member declarations, typically the right-hand side of a binding either goes on one line, or (if it's too long) goes on a new line indented one level.

For example, the following examples are compliant:

// ✔️ OK
let a =
    """
foobar, long string
"""

// ✔️ OK
type File =
    member this.SaveAsync(path: string) : Async<unit> =
        async {
            // IO operation
            return ()
        }

// ✔️ OK
let c =
    { Name = "Bilbo"
      Age = 111
      Region = "The Shire" }

// ✔️ OK
let d =
    while f do
        printfn "%A" x

These are non-compliant:

// ❌ Not OK, code formatters will reformat to the above by default
let a = """
foobar, long string
"""

let d = while f do
    printfn "%A" x

Record type instantiations may also place the brackets on their own lines:

// ✔️ OK
let bilbo =
    { 
        Name = "Bilbo"
        Age = 111
        Region = "The Shire" 
    }

You may also prefer to use Stroustrup style, with the opening { on the same line as the binding name:

// ✔️ OK
let bilbo = {
    Name = "Bilbo"
    Age = 111
    Region = "The Shire"
}

Separate members with a single blank line and document and add a documentation comment:

// ✔️ OK

/// This is a thing
type ThisThing(value: int) =

    /// Gets the value
    member _.Value = value

    /// Returns twice the value
    member _.TwiceValue() = value*2

Extra blank lines may be used (sparingly) to separate groups of related functions. Blank lines may be omitted between a bunch of related one-liners (for example, a set of dummy implementations). Use blank lines in functions, sparingly, to indicate logical sections.

Formatting function and member arguments

When defining a function, use white space around each argument.

// ✔️ OK
let myFun (a: decimal) (b: int) c = a + b + c

// ❌ Not OK, code formatters will reformat to the above by default
let myFunBad (a:decimal)(b:int)c = a + b + c

If you have a long function definition, place the parameters on new lines and indent them to match the indentation level of the subsequent parameter.

// ✔️ OK
module M =
    let longFunctionWithLotsOfParameters
        (aVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        =
        // ... the body of the method follows

    let longFunctionWithLotsOfParametersAndReturnType
        (aVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        : ReturnType =
        // ... the body of the method follows

    let longFunctionWithLongTupleParameter
        (
            aVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse
        ) =
        // ... the body of the method follows

    let longFunctionWithLongTupleParameterAndReturnType
        (
            aVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse
        ) : ReturnType =
        // ... the body of the method follows

This also applies to members, constructors, and parameters using tuples:

// ✔️ OK
type TypeWithLongMethod() =
    member _.LongMethodWithLotsOfParameters
        (
            aVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse,
            aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse
        ) =
        // ... the body of the method

// ✔️ OK
type TypeWithLongConstructor
    (
        aVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse,
        aSecondVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse,
        aThirdVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse
    ) =
    // ... the body of the class follows

// ✔️ OK
type TypeWithLongSecondaryConstructor () =
    new
        (
            aVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse,
            aSecondVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse,
            aThirdVeryLongCtorParam: AVeryLongTypeThatYouNeedToUse
        ) =
        // ... the body of the constructor follows

If the parameters are curried, place the = character along with any return type on a new line:

// ✔️ OK
type TypeWithLongCurriedMethods() =
    member _.LongMethodWithLotsOfCurriedParamsAndReturnType
        (aVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        : ReturnType =
        // ... the body of the method

    member _.LongMethodWithLotsOfCurriedParams
        (aVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aSecondVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        (aThirdVeryLongParam: AVeryLongTypeThatYouNeedToUse)
        =
        // ... the body of the method

This is a way to avoid too long lines (in case return type might have long name) and have less line-damage when adding parameters.

Formatting operator declarations

Optionally use white space to surround an operator definition:

// ✔️ OK
let ( !> ) x f = f x

// ✔️ OK
let (!>) x f = f x

For any custom operator that starts with * and that has more than one character, you need to add a white space to the beginning of the definition to avoid a compiler ambiguity. Because of this, we recommend that you simply surround the definitions of all operators with a single white-space character.

Formatting record declarations

For record declarations, by default you should indent the { in the type definition by four spaces, start the label list on the same line, and align members, if any, with the { token:

// ✔️ OK
type PostalAddress =
    { Address: string
      City: string
      Zip: string }

It is also common to prefer putting brackets on their own line, with labels indented by an additional four spaces:

// ✔️ OK
type PostalAddress =
    { 
        Address: string
        City: string
        Zip: string 
    }

You can also put the { at the end of the first line of the type definition (Stroustrup style):

// ✔️ OK
type PostalAddress = {
    Address: string
    City: string
    Zip: string
}

If additional members are needed, don't use with/end whenever possible:

// ✔️ OK
type PostalAddress =
    { Address: string
      City: string
      Zip: string }
    member x.ZipAndCity = $"{x.Zip} {x.City}"

// ❌ Not OK, code formatters will reformat to the above by default
type PostalAddress =
    { Address: string
      City: string
      Zip: string }
  with
    member x.ZipAndCity = $"{x.Zip} {x.City}"
  end
  
// ✔️ OK
type PostalAddress =
    { 
        Address: string
        City: string
        Zip: string 
    }
    member x.ZipAndCity = $"{x.Zip} {x.City}"
    
// ❌ Not OK, code formatters will reformat to the above by default
type PostalAddress =
    { 
        Address: string
        City: string
        Zip: string 
    }
    with
        member x.ZipAndCity = $"{x.Zip} {x.City}"
    end

The exception to this style rule is if you format records according to the Stroustrup style. In this situation, due to compiler rules, the with keyword is required if you want to implement an interface or add additional members:

// ✔️ OK
type PostalAddress = {
    Address: string
    City: string
    Zip: string
} with
    member x.ZipAndCity = $"{x.Zip} {x.City}"
   
// ❌ Not OK, this is currently invalid F# code
type PostalAddress = {
    Address: string
    City: string
    Zip: string
} 
member x.ZipAndCity = $"{x.Zip} {x.City}"

When XML documentation is added for record fields, Aligned or Stroustrup style is preferred, and additional whitespace should be added between members:

// ❌ Not OK - putting { and comments on the same line should be avoided
type PostalAddress =
    { /// The address
      Address: string

      /// The city
      City: string

      /// The zip code
      Zip: string }

    /// Format the zip code and the city
    member x.ZipAndCity = $"{x.Zip} {x.City}"

// ✔️ OK
type PostalAddress =
    {
        /// The address
        Address: string

        /// The city
        City: string

        /// The zip code
        Zip: string
    }

    /// Format the zip code and the city
    member x.ZipAndCity = $"{x.Zip} {x.City}"

// ✔️ OK - Stroustrup Style
type PostalAddress = {
    /// The address
    Address: string

    /// The city
    City: string

    /// The zip code
    Zip: string
} with
    /// Format the zip code and the city
    member x.ZipAndCity = $"{x.Zip} {x.City}"

Placing the opening token on a new line and the closing token on a new line is preferable if you're declaring interface implementations or members on the record:

// ✔️ OK
// Declaring additional members on PostalAddress
type PostalAddress =
    {
        /// The address
        Address: string

        /// The city
        City: string

        /// The zip code
        Zip: string
    }

    member x.ZipAndCity = $"{x.Zip} {x.City}"

// ✔️ OK
type MyRecord =
    {
        /// The record field
        SomeField: int
    }
    interface IMyInterface

These same rules apply for anonymous record type aliases.

Formatting discriminated union declarations

For discriminated union declarations, indent | in type definition by four spaces:

// ✔️ OK
type Volume =
    | Liter of float
    | FluidOunce of float
    | ImperialPint of float

// ❌ Not OK
type Volume =
| Liter of float
| USPint of float
| ImperialPint of float

When there is a single short union, you can omit the leading |.

// ✔️ OK
type Address = Address of string

For a longer or multi-line union, keep the | and place each union field on a new line, with the separating * at the end of each line.

// ✔️ OK
[<NoEquality; NoComparison>]
type SynBinding =
    | SynBinding of
        accessibility: SynAccess option *
        kind: SynBindingKind *
        mustInline: bool *
        isMutable: bool *
        attributes: SynAttributes *
        xmlDoc: PreXmlDoc *
        valData: SynValData *
        headPat: SynPat *
        returnInfo: SynBindingReturnInfo option *
        expr: SynExpr *
        range: range *
        seqPoint: DebugPointAtBinding

When documentation comments are added, use an empty line before each /// comment.

// ✔️ OK

/// The volume
type Volume =

    /// The volume in liters
    | Liter of float

    /// The volume in fluid ounces
    | FluidOunce of float

    /// The volume in imperial pints
    | ImperialPint of float

Formatting literal declarations

F# literals using the Literal attribute should place the attribute on its own line and use PascalCase naming:

// ✔️ OK

[<Literal>]
let Path = __SOURCE_DIRECTORY__ + "/" + __SOURCE_FILE__

[<Literal>]
let MyUrl = "www.mywebsitethatiamworkingwith.com"

Avoid placing the attribute on the same line as the value.

Formatting module declarations

Code in a local module must be indented relative to the module, but code in a top-level module should not be indented. Namespace elements do not have to be indented.

// ✔️ OK - A is a top-level module.
module A

let function1 a b = a - b * b

// ✔️ OK - A1 and A2 are local modules.
module A1 =
    let function1 a b = a * a + b * b

module A2 =
    let function2 a b = a * a - b * b

Formatting do declarations

In type declarations, module declarations and computation expressions, the use of do or do! is sometimes required for side-effecting operations. When these span multiple lines, use indentation and a new line to keep the indentation consistent with let/let!. Here's an example using do in a class:

// ✔️ OK
type Foo() =
    let foo =
        fooBarBaz
        |> loremIpsumDolorSitAmet
        |> theQuickBrownFoxJumpedOverTheLazyDog

    do
        fooBarBaz
        |> loremIpsumDolorSitAmet
        |> theQuickBrownFoxJumpedOverTheLazyDog

// ❌ Not OK - notice the "do" expression is indented one space less than the `let` expression
type Foo() =
    let foo =
        fooBarBaz
        |> loremIpsumDolorSitAmet
        |> theQuickBrownFoxJumpedOverTheLazyDog
    do fooBarBaz
       |> loremIpsumDolorSitAmet
       |> theQuickBrownFoxJumpedOverTheLazyDog

Here's an example with do! using two spaces of indentation (because with do! there is coincidentally no difference between the approaches when using four spaces of indentation):

// ✔️ OK
async {
  let! foo =
    fooBarBaz
    |> loremIpsumDolorSitAmet
    |> theQuickBrownFoxJumpedOverTheLazyDog

  do!
    fooBarBaz
    |> loremIpsumDolorSitAmet
    |> theQuickBrownFoxJumpedOverTheLazyDog
}

// ❌ Not OK - notice the "do!" expression is indented two spaces more than the `let!` expression
async {
  let! foo =
    fooBarBaz
    |> loremIpsumDolorSitAmet
    |> theQuickBrownFoxJumpedOverTheLazyDog
  do! fooBarBaz
      |> loremIpsumDolorSitAmet
      |> theQuickBrownFoxJumpedOverTheLazyDog
}

Formatting computation expression operations

When creating custom operations for computation expressions, it is recommended to use camelCase naming:

// ✔️ OK
type MathBuilder() =
    member _.Yield _ = 0

    [<CustomOperation("addOne")>]
    member _.AddOne (state: int) =
        state + 1

    [<CustomOperation("subtractOne")>]
    member _.SubtractOne (state: int) =
        state - 1

    [<CustomOperation("divideBy")>]
    member _.DivideBy (state: int, divisor: int) =
        state / divisor

    [<CustomOperation("multiplyBy")>]
    member _.MultiplyBy (state: int, factor: int) =
        state * factor

let math = MathBuilder()

let myNumber =
    math {
        addOne
        addOne
        addOne
        subtractOne
        divideBy 2
        multiplyBy 10
    }

The domain that's being modeled should ultimately drive the naming convention. If it's idiomatic to use a different convention, that convention should be used instead.

If the return value of an expression is a computation expression, prefer putting the computation expression keyword name on its own line:

// ✔️ OK
let foo () = 
    async {
        let! value = getValue()
        do! somethingElse()
        return! anotherOperation value 
    }

You may also prefer to put the computation expression on the same line as the binding name:

// ✔️ OK
let foo () = async {
    let! value = getValue()
    do! somethingElse()
    return! anotherOperation value 
}

Whichever your preference, you should aim to remain consistent throughout your codebase. Formatters may allow you to specify this preference to remain consistent.

Formatting types and type annotations

This section discusses formatting types and type annotations. This includes formatting signature files with the .fsi extension.

For types, prefer prefix syntax for generics (`Foo<T>`), with some specific exceptions

F# allows both postfix style of writing generic types (for example, int list) and the prefix style (for example, list<int>). Postfix style can only be used with a single type argument. Always prefer the .NET style, except for six specific types:

For F# Lists, use the postfix form: int list rather than list<int>.
For F# Options, use the postfix form: int option rather than option<int>.
For F# Value Options, use the postfix form: int voption rather than voption<int>.
For F# arrays, use the postfix form: int array rather than array<int> or int[].
For Reference Cells, use int ref rather than ref<int> or Ref<int>.
For F# Sequences, use the postfix form: int seq rather than seq<int>.

For all other types, use the prefix form.

Formatting function types

When defining the signature of a function, use white space around the -> symbol:

// ✔️ OK
type MyFun = int -> int -> string

// ❌ Not OK
type MyFunBad = int->int->string

Formatting value and argument type annotations

When defining values or arguments with type annotations, use white space after the : symbol, but not before:

// ✔️ OK
let complexFunction (a: int) (b: int) c = a + b + c

let simpleValue: int = 0 // Type annotation for let-bound value

type C() =
    member _.Property: int = 1

// ❌ Not OK
let complexFunctionPoorlyAnnotated (a :int) (b :int) (c:int) = a + b + c
let simpleValuePoorlyAnnotated1:int = 1
let simpleValuePoorlyAnnotated2 :int = 2

Formatting multiline type annotations

When a type annotation is long or multiline, put them on the next line, indented by one level.

type ExprFolder<'State> =
    { exprIntercept: 
        ('State -> Expr -> 'State) -> ('State -> Expr -> 'State -> 'State -> Exp -> 'State }
        
let UpdateUI
    (model:
#if NETCOREAPP2_1
        ITreeModel
#else
        TreeModel
#endif
    )
    (info: FileInfo) =
    // code
    ()

let f
    (x:
        {|
            a: Second
            b: Metre
            c: Kilogram
            d: Ampere
            e: Kelvin
            f: Mole
            g: Candela
        |})
    =
    x.a

type Sample
    (
        input: 
            LongTupleItemTypeOneThing * 
            LongTupleItemTypeThingTwo * 
            LongTupleItemTypeThree * 
            LongThingFour * 
            LongThingFiveYow
    ) =
    class
    end

For inline anonymous record types, you may also use Stroustrup style:

let f
    (x: {|
        x: int
        y: AReallyLongTypeThatIsMuchLongerThan40Characters
     |})
    =
    x

Formatting return type annotations

In function or member return type annotations, use white space before and after the : symbol:

// ✔️ OK
let myFun (a: decimal) b c : decimal = a + b + c

type C() =
    member _.SomeMethod(x: int) : int = 1

// ❌ Not OK
let myFunBad (a: decimal) b c:decimal = a + b + c

let anotherFunBad (arg: int): unit = ()

type C() =
    member _.SomeMethodBad(x: int): int = 1

Formatting types in signatures

When writing full function types in signatures, it's sometimes necessary to split the arguments over multiple lines. The return type is always indented.

For a tupled function, the arguments are separated by *, placed at the end of each line.

For example, consider a function with the following implementation:

let SampleTupledFunction(arg1, arg2, arg3, arg4) = ...

In the corresponding signature file (.fsi extension) the function can be formatted as follows when multi-line formatting is required:

// ✔️ OK
val SampleTupledFunction:
    arg1: string *
    arg2: string *
    arg3: int *
    arg4: int ->
        int list

Likewise consider a curried function:

let SampleCurriedFunction arg1 arg2 arg3 arg4 = ...

In the corresponding signature file, the -> are placed at the end of each line:

// ✔️ OK
val SampleCurriedFunction:
    arg1: string ->
    arg2: string ->
    arg3: int ->
    arg4: int ->
        int list

Likewise, consider a function that takes a mix of curried and tupled arguments:

// Typical call syntax:
let SampleMixedFunction
        (arg1, arg2)
        (arg3, arg4, arg5)
        (arg6, arg7)
        (arg8, arg9, arg10) = ..

In the corresponding signature file, the types preceded by a tuple are indented

// ✔️ OK
val SampleMixedFunction:
    arg1: string *
    arg2: string ->
        arg3: string *
        arg4: string *
        arg5: TType ->
            arg6: TType *
            arg7: TType ->
                arg8: TType *
                arg9: TType *
                arg10: TType ->
                    TType list

The same rules apply for members in type signatures:

type SampleTypeName =
    member ResolveDependencies:
        arg1: string *
        arg2: string ->
            string

Formatting explicit generic type arguments and constraints

The guidelines below apply to function definitions, member definitions, type definitions, and function applications.

Keep generic type arguments and constraints on a single line if it’s not too long:

// ✔️ OK
let f<'T1, 'T2 when 'T1: equality and 'T2: comparison> param =
    // function body

If both generic type arguments/constraints and function parameters don’t fit, but the type parameters/constraints alone do, place the parameters on new lines:

// ✔️ OK
let f<'T1, 'T2 when 'T1: equality and 'T2: comparison>
    param
    =
    // function body

If the type parameters or constraints are too long, break and align them as shown below. Keep the list of type parameters on the same line as the function, regardless of its length. For constraints, place when on the first line, and keep each constraint on a single line regardless of its length. Place > at the end of the last line. Indent the constraints by one level.

// ✔️ OK
let inline f< ^T1, ^T2
    when ^T1: (static member Foo1: unit -> ^T2)
    and ^T2: (member Foo2: unit -> int)
    and ^T2: (member Foo3: string -> ^T1 option)>
    arg1
    arg2
    =
    // function body

If the type parameters/constraints are broken up, but there are no normal function parameters, place the = on a new line regardless:

// ✔️ OK
let inline f< ^T1, ^T2
    when ^T1: (static member Foo1: unit -> ^T2)
    and ^T2: (member Foo2: unit -> int)
    and ^T2: (member Foo3: string -> ^T1 option)>
    =
    // function body

The same rules apply for function applications:

// ✔️ OK
myObj
|> Json.serialize<
    {| child: {| displayName: string; kind: string |}
       newParent: {| id: string; displayName: string |}
       requiresApproval: bool |}>

// ✔️ OK
Json.serialize<
    {| child: {| displayName: string; kind: string |}
       newParent: {| id: string; displayName: string |}
       requiresApproval: bool |}>
    myObj

Formatting inheritance

The arguments for the base class constructor appear in the argument list in the inherit clause. Put the inherit clause on a new line, indented by one level.

type MyClassBase(x: int) =
   class
   end

// ✔️ OK
type MyClassDerived(y: int) =
   inherit MyClassBase(y * 2)

// ❌ Not OK
type MyClassDerived(y: int) = inherit MyClassBase(y * 2)

When the constructor is long or multiline, put them on the next line, indented by one level.
Format this multiline constructor according to the rules of multiline function applications.

type MyClassBase(x: string) =
   class
   end

// ✔️ OK
type MyClassDerived(y: string) =
    inherit 
        MyClassBase(
            """
            very long
            string example
            """
        )
        
// ❌ Not OK
type MyClassDerived(y: string) =
    inherit MyClassBase(
        """
        very long
        string example
        """)

Formatting the primary constructor

In default formatting conventions, no space is added between the type name and the parentheses for the primary constructor.

// ✔️ OK
type MyClass() =
    class
    end

type MyClassWithParams(x: int, y: int) =
    class
    end
        
// ❌ Not OK
type MyClass () =
    class
    end

type MyClassWithParams (x: int, y: int) =
    class
    end

Multiple constructors

When the inherit clause is part of a record, put it on the same line if it is short. And put it on the next line, indented by one level, if it is long or multiline.

type BaseClass =
    val string1: string
    new () = { string1 = "" }
    new (str) = { string1 = str }

type DerivedClass =
    inherit BaseClass

    val string2: string
    new (str1, str2) = { inherit BaseClass(str1); string2 = str2 }
    new () = 
        { inherit 
            BaseClass(
                """
                very long
                string example
                """
            )
          string2 = str2 }

Formatting attributes

Attributes are placed above a construct:

// ✔️ OK
[<SomeAttribute>]
type MyClass() = ...

// ✔️ OK
[<RequireQualifiedAccess>]
module M =
    let f x = x

// ✔️ OK
[<Struct>]
type MyRecord =
    { Label1: int
      Label2: string }

They should go after any XML documentation:

// ✔️ OK

/// Module with some things in it.
[<RequireQualifiedAccess>]
module M =
    let f x = x

Formatting attributes on parameters

Attributes can also be placed on parameters. In this case, place then on the same line as the parameter and before the name:

// ✔️ OK - defines a class that takes an optional value as input defaulting to false.
type C() =
    member _.M([<Optional; DefaultParameterValue(false)>] doSomething: bool)

Formatting multiple attributes

When multiple attributes are applied to a construct that's not a parameter, place each attribute on a separate line:

// ✔️ OK

[<Struct>]
[<IsByRefLike>]
type MyRecord =
    { Label1: int
      Label2: string }

When applied to a parameter, place attributes on the same line and separate them with a ; separator.

Acknowledgments

These guidelines are based on A comprehensive guide to F# Formatting Conventions by Anh-Dung Phan.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!