Pre-existing Postgres

While not officially recommended, it is possible to run Immich using a pre-existing Postgres server. To use this setup, you should have a baseline level of familiarity with Postgres and the Linux command line. If you do not have these, we recommend using the default setup with a dedicated Postgres container.

By default, Immich expects superuser permission on the Postgres database and requires certain extensions to be installed. This guide outlines the steps required to prepare a pre-existing Postgres server to be used by Immich.

:::tip Running with a pre-existing Postgres server can unlock powerful administrative features, including logical replication and streaming write-ahead log backups using programs like pgBackRest or Barman. :::

Prerequisites

You must install pgvector (>= 0.7.0, < 1.0.0), as it is a prerequisite for vchord. The easiest way to do this on Debian/Ubuntu is by adding the PostgreSQL Apt repository and then running apt install postgresql-NN-pgvector, where NN is your Postgres version (e.g., 16).

You must install VectorChord into your instance of Postgres using their instructions. After installation, add shared_preload_libraries = 'vchord.so' to your postgresql.conf. If you already have some shared_preload_libraries set, you can separate each extension with a comma. For example, shared_preload_libraries = 'pg_stat_statements, vchord.so'.

:::note Immich is known to work with Postgres versions >= 14, < 18.

Make sure the installed version of VectorChord is compatible with your version of Immich. The current accepted range for VectorChord is >= 0.3.0, < 0.5.0. :::

Specifying the connection URL

You can connect to your pre-existing Postgres server by setting the DB_URL environment variable in the .env file.

DB_URL='postgresql://immichdbusername:immichdbpassword@postgreshost:postgresport/immichdatabasename'

# require a SSL connection to Postgres
# DB_URL='postgresql://immichdbusername:immichdbpassword@postgreshost:postgresport/immichdatabasename?sslmode=require'

# require a SSL connection, but don't enforce checking the certificate name
# DB_URL='postgresql://immichdbusername:immichdbpassword@postgreshost:postgresport/immichdatabasename?sslmode=require&sslmode=no-verify'

With superuser permission

Typically Immich expects superuser permission in the database, which you can grant by running ALTER USER <immichdbusername> WITH SUPERUSER; at the psql console. If you prefer not to grant superuser permissions, follow the instructions in the next section.

Without superuser permission

:::caution This method is recommended for advanced users only and often requires manual intervention when updating Immich. :::

:::danger Currently, automated backups require superuser permission due to the usage of pg_dumpall. :::

Immich can run without superuser permissions by following the below instructions at the psql prompt to prepare the database.

CREATE DATABASE <immichdatabasename>;
\c <immichdatabasename>
BEGIN;
ALTER DATABASE <immichdatabasename> OWNER TO <immichdbusername>;
CREATE EXTENSION vchord CASCADE;
CREATE EXTENSION earthdistance CASCADE;
COMMIT;

Updating VectorChord

When installing a new version of VectorChord, you will need to manually update the extension and reindex by connecting to the Immich database and running:

ALTER EXTENSION vchord UPDATE;
REINDEX INDEX face_index;
REINDEX INDEX clip_index;

Migrating to VectorChord

VectorChord is the successor extension to pgvecto.rs, allowing for higher performance, lower memory usage and higher quality results for smart search and facial recognition.

Migrating from pgvecto.rs

Support for pgvecto.rs will be dropped in a later release, hence we recommend all users currently using pgvecto.rs to migrate to VectorChord at their convenience. There are two primary approaches to do so.

The easiest option is to have both extensions installed during the migration:

Migration steps (automatic)

1. Ensure you still have pgvecto.rs installed 2. Install `pgvector` (`>= 0.7.0, < 1.0.0`). The easiest way to do this is on Debian/Ubuntu by adding the [PostgreSQL Apt repository][pg-apt] and then running `apt install postgresql-NN-pgvector`, where `NN` is your Postgres version (e.g., `16`) 3. [Install VectorChord][vchord-install] 4. Add `shared_preload_libraries= 'vchord.so, vectors.so'` to your `postgresql.conf`, making sure to include _both_ `vchord.so` and `vectors.so`. You may include other libraries here as well if needed 5. Restart the Postgres database 6. If Immich does not have superuser permissions, run the SQL command `CREATE EXTENSION vchord CASCADE;` using psql or your choice of database client 7. Start Immich and wait for the logs `Reindexed face_index` and `Reindexed clip_index` to be output 8. If Immich does not have superuser permissions, run the SQL command `DROP EXTENSION vectors;` 9. Drop the old schema by running `DROP SCHEMA vectors;` 10. Remove the `vectors.so` entry from the `shared_preload_libraries` setting 11. Restart the Postgres database 12. Uninstall pgvecto.rs (e.g. `apt-get purge vectors-pg14` on Debian-based environments, replacing `pg14` as appropriate). `pgvector` must remain installed as it provides the data types used by `vchord`

If it is not possible to have both VectorChord and pgvecto.rs installed at the same time, you can perform the migration with more manual steps:

Migration steps (manual)

1. While pgvecto.rs is still installed, run the following SQL command using psql or your choice of database client. Take note of the number outputted by this command as you will need it later

SELECT atttypmod as dimsize
    FROM pg_attribute f
    JOIN pg_class c ON c.oid = f.attrelid
    WHERE c.relkind = 'r'::char
    AND f.attnum > 0
    AND c.relname = 'smart_search'::text
    AND f.attname = 'embedding'::text;

Remove references to pgvecto.rs using the below SQL commands

DROP INDEX IF EXISTS clip_index;
DROP INDEX IF EXISTS face_index;
ALTER TABLE smart_search ALTER COLUMN embedding SET DATA TYPE real[];
ALTER TABLE face_search ALTER COLUMN embedding SET DATA TYPE real[];

Install VectorChord
Change the columns back to the appropriate vector types, replacing <number> with the number from step 1

CREATE EXTENSION IF NOT EXISTS vchord CASCADE;
ALTER TABLE smart_search ALTER COLUMN embedding SET DATA TYPE vector(<number>);
ALTER TABLE face_search ALTER COLUMN embedding SET DATA TYPE vector(512);

Start Immich and let it create new indices using VectorChord

Migrating from pgvector

Migration steps

1. Ensure you have at least 0.7.0 of pgvector installed. If it is below that, please upgrade it and run the SQL command `ALTER EXTENSION vector UPDATE;` using psql or your choice of database client 2. Follow the Prerequisites to install VectorChord 3. If Immich does not have superuser permissions, run the SQL command `CREATE EXTENSION vchord CASCADE;` 4. Remove the `DB_VECTOR_EXTENSION=pgvector` environmental variable as it will make Immich still use pgvector if set 5. Start Immich and let it create new indices using VectorChord

Note that VectorChord itself uses pgvector types, so you should not uninstall pgvector after following these steps.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!