C++ Interview Question And Answer

C++ Interview Questions & Answers
What is C++?
Released in 1985, C++ is an object-oriented programming language created by
Bjarne Stroustrup. C++ maintains almost all aspects of the C language, while
simplifying memory management and adding several features - including a new
datatype known as a class (you will learn more about these later) - to allow object-
oriented programming. C++ maintains the features of C which allowed for low-level
memory access but also gives the programmer new tools to simplify memory
management.
C++ used for:
C++ is a powerful general-purpose programming language. It can be used to create
small programs or large applications. It can be used to make CGI scripts or console-
only DOS programs. C++ allows you to create programs to do almost anything you
need to do. The creator of C++, Bjarne Stroustrup, has put together a partial list of
applications written in C++.
How do you find out if a linked-list has an end? (i.e. the list is not a cycle)
You can find out by using 2 pointers. One of them goes 2 nodes each time. The
second one goes at 1 nodes each time. If there is a cycle, the one that goes 2 nodes
each time will eventually meet the one that goes slower. If that is the case, then you
will know the linked-list is a cycle.
What is the difference between realloc() and free()?
The free subroutine frees a block of memory previously allocated by the malloc
subroutine. Undefined results occur if the Pointer parameter is not a valid pointer. If
the Pointer parameter is a null value, no action will occur. The realloc subroutine
changes the size of the block of memory pointed to by the Pointer parameter to the
number of bytes specified by the Size parameter and returns a new pointer to the
block. The pointer specified by the Pointer parameter must have been created with
the malloc, calloc, or realloc subroutines and not been deallocated with the free or
realloc subroutines. Undefined results occur if the Pointer parameter is not a valid
pointer.
What is function overloading and operator overloading?
Function overloading: C++ enables several functions of the same name to be
defined, as long as these functions have different sets of parameters (at least as far
as their types are concerned). This capability is called function overloading. When an
overloaded function is called, the C++ compiler selects the proper function by
examining the number, types and order of the arguments in the call. Function
overloading is commonly used to create several functions of the same name that
perform similar tasks but on different data types.
Operator overloading allows existing C++ operators to be redefined so that they
Customer is king inc.,

work on objects of user-defined classes. Overloaded operators are syntactic sugar for
equivalent function calls. They form a pleasant facade that doesn't add anything
fundamental to the language (but they can improve understandability and reduce
maintenance costs).
What is the difference between declaration and definition?
The declaration tells the compiler that at some later point we plan to present the
definition of this declaration.
E.g.: void stars () //function declaration
The definition contains the actual implementation.
E.g.: void stars () // declarator
{
for(int j=10; j > =0; j--) //function body
cout << *;
cout <<>
What are the advantages of inheritance?
It permits code reusability. Reusability saves time in program development. It
encourages the reuse of proven and debugged high-quality software, thus reducing
problem after a system becomes functional.
How do you write a function that can reverse a linked-list?
void reverselist(void)
{
if(head==0)
return;
if(head->next==0)
return;
if(head->next==tail)
{
head->next = 0;
tail->next = head;
}
else
{
node* pre = head;
node* cur = head->next;
node* curnext = cur->next;
head->next = 0;
cur-> next = head;
for(; curnext!=0; )
{
cur->next = pre;
pre = cur;
cur = curnext;
curnext = curnext->next;

}
curnext->next = cur;
}
}
What do you mean by inline function?
The idea behind inline functions is to insert the code of a called function at the point
where the function is called. If done carefully, this can improve the application's
performance in exchange for increased compile time and possibly (but not always)
an increase in the size of the generated binary executables.
Write a program that ask for user input from 5 to 9 then calculate the
average
#include "iostream.h"
int main() {
int MAX = 4;
int total = 0;
int average;
int numb;
for (int i=0;i
{
cout << "Please enter your input between 5 and 9: ";
cin >> numb;
while ( numb<5>9) {
cout << "Invalid input, please re-enter: ";
cin >> numb;
}
total = total + numb;
}
average = total/MAX;
cout << "The average number is: " << average << "n";
return 0;
}

Write a short code using C++ to print out all odd number from 1 to 100
using a for loop
for( unsigned int i = 1; i < = 100; i++ )
if( i & 0x00000001 )
cout << i << ",";
What is public, protected, private?
• Public, protected and private are three access specifiers in C++.
• Public data members and member functions are accessible outside the class.
• Protected data members and member functions are only available to derived
classes.
• Private data members and member functions can’t be accessed outside the
class. However there is an exception can be using friend classes.
Write a function that swaps the values of two integers, using int* as the
argument type.
void swap(int* a, int*b) { int t; t = *a; *a = *b; *b = t; }
Tell how to check whether a linked list is circular.
Create two pointers, each set to the start of the list. Update each as follows:
while (pointer1) {
pointer1 = pointer1->next;
pointer2 = pointer2->next; if (pointer2) pointer2=pointer2->next;
if (pointer1 == pointer2) {
print ("circularn");
}
}
OK, why does this work?
If a list is circular, at some point pointer2 will wrap around and be either at the item
just before pointer1, or the item before that. Either way, it’s either 1 or 2 jumps until
they meet.
What is polymorphism?
Polymorphism is the idea that a base class can be inherited by several classes. A
base class pointer can point to its child class and a base class array can store
different child class objects.
What is virtual constructors/destructors?
Answer1
Virtual destructors:

If an object (with a non-virtual destructor) is destroyed explicitly by applying the
delete operator to a base-class pointer to the object, the base-class destructor
function (matching the pointer type) is called on the object.
There is a simple solution to this problem declare a virtual base-class destructor.
This makes all derived-class destructors virtual even though they don’t have the
same name as the base-class destructor. Now, if the object in the hierarchy is
destroyed explicitly by applying the delete operator to a base-class pointer to a
derived-class object, the destructor for the appropriate class is called. Virtual
constructor: Constructors cannot be virtual. Declaring a constructor as a virtual
function is a syntax error.
Answer2
Virtual destructors: If an object (with a non-virtual destructor) is destroyed explicitly
by applying the delete operator to a base-class pointer to the object, the base-class
destructor function (matching the pointer type) is called on the object.
There is a simple solution to this problem – declare a virtual base-class destructor.
This makes all derived-class destructors virtual even though they don’t have the
same name as the base-class destructor. Now, if the object in the hierarchy is
destroyed explicitly by applying the delete operator to a base-class pointer to a
derived-class object, the destructor for the appropriate class is called.
Virtual constructor: Constructors cannot be virtual. Declaring a constructor as a
virtual function is a syntax error. Does c++ support multilevel and multiple
inheritance?
Yes.
What are the advantages of inheritance?
• It permits code reusability.
• Reusability saves time in program development.
• It encourages the reuse of proven and debugged high-quality software, thus
reducing problem after a system becomes functional.
What is the difference between declaration and definition?
The declaration tells the compiler that at some later point we plan to present the
definition of this declaration.
E.g.: void stars () //function declaration
The definition contains the actual implementation.
E.g.: void stars () // declarator
{
for(int j=10; j>=0; j--) //function body
cout<<”*”;
cout<
What is the difference between an ARRAY and a LIST?
Answer1
Array is collection of homogeneous elements.
List is collection of heterogeneous elements.
For Array memory allocated is static and continuous.
For List memory allocated is dynamic and Random.
Array: User need not have to keep in track of next memory allocation.

List: User has to keep in Track of next location where memory is allocated.
Answer2
Array uses direct access of stored members, list uses sequencial access for
members.
//With Array you have direct access to memory position 5
Object x = a[5]; // x takes directly a reference to 5th element of array
//With the list you have to cross all previous nodes in order to get the 5th node:
list mylist;
list::iterator it;
for( it = list.begin() ; it != list.end() ; it++ )
{
if( i==5)
{
x = *it;
break;
}
i++;
}
Does c++ support multilevel and multiple inheritance?
Yes.
What is a template?
Templates allow to create generic functions that admit any data type as parameters
and return value without having to overload the function with all the possible data
types. Until certain point they fulfill the functionality of a macro. Its prototype is any
of the two following ones:
template function_declaration; template function_declaration;
The only difference between both prototypes is the use of keyword class or
typename, its use is indistinct since both expressions have exactly the same
meaning and behave exactly the same way.
Define a constructor - What it is and how it might be called (2 methods).
Answer1
constructor is a member function of the class, with the name of the function being
the same as the class name. It also specifies how the object should be initialized.
Ways of calling constructor:
1) Implicitly: automatically by complier when an object is created.
2) Calling the constructors explicitly is possible, but it makes the code unverifiable.

Answer2
class Point2D{
int x; int y;
public Point2D() : x(0) , y(0) {} //default (no argument) constructor
};
main(){
Point2D MyPoint; // Implicit Constructor call. In order to allocate memory on stack,
the default constructor is implicitly called.
Point2D * pPoint = new Point2D(); // Explicit Constructor call. In order to allocate
memory on HEAP we call the default constructor.
You have two pairs: new() and delete() and another pair : alloc() and free(). Explain
differences between eg. new() and malloc()
Answer1
1.) “new and delete” are preprocessors while “malloc() and free()” are functions. [we
dont use brackets will calling new or delete].
2.) no need of allocate the memory while using “new” but in “malloc()” we have to
use “sizeof()”.
3.) “new” will initlize the new memory to 0 but “malloc()” gives random value in the
new alloted memory location [better to use calloc()]
Answer2
new() allocates continous space for the object instace
malloc() allocates distributed space.
new() is castless, meaning that allocates memory for this specific type,
malloc(), calloc() allocate space for void * that is cated to the specific class type
pointer.
What is the difference between class and structure?
Structure: Initially (in C) a structure was used to bundle different type of data types

together to perform a particular functionality. But C++ extended the structure to
contain functions also. The major difference is that all declarations inside a structure
are by default public.
Class: Class is a successor of Structure. By default all the members inside the class
are private.
What is RTTI?
Runtime type identification (RTTI) lets you find the dynamic type of an object when
you have only a pointer or a reference to the base type. RTTI is the official way in
standard C++ to discover the type of an object and to convert the type of a pointer
or reference (that is, dynamic typing). The need came from practical experience with
C++. RTTI replaces many homegrown versions with a solid, consistent approach.
What is encapsulation?
Packaging an object’s variables within its methods is called encapsulation.
Explain term POLIMORPHISM and give an example using eg. SHAPE object: If I have
a base class SHAPE, how would I define DRAW methods for two objects CIRCLE and
SQUARE
Answer1
POLYMORPHISM : A phenomenon which enables an object to react differently to the
same function call.
in C++ it is attained by using a keyword virtual
Example
public class SHAPE
{
public virtual void SHAPE::DRAW()=0;
}
Note here the function DRAW() is pure virtual which means the sub classes must
implement the DRAW() method and SHAPE cannot be instatiated
public class CIRCLE::public SHAPE
{

public void CIRCLE::DRAW()
{
// TODO drawing circle
}
}
public class SQUARE::public SHAPE
{
public void SQUARE::DRAW()
{
// TODO drawing square
}
}
now from the user class the calls would be like
globally
SHAPE *newShape;
When user action is to draw
public void MENU::OnClickDrawCircle(){
newShape = new CIRCLE();
}
public void MENU::OnClickDrawCircle(){
newShape = new SQUARE();
}
the when user actually draws
public void CANVAS::OnMouseOperations(){
newShape->DRAW();

}
Answer2
class SHAPE{
public virtual Draw() = 0; //abstract class with a pure virtual method
};
class CIRCLE{
public int r;
public virtual Draw() { this->drawCircle(0,0,r); }
};
class SQURE
public int a;
public virtual Draw() { this->drawRectangular(0,0,a,a); }
};
Each object is driven down from SHAPE implementing Draw() function in its own
way.
What is an object?
Object is a software bundle of variables and related methods. Objects have state and
behavior.
How can you tell what shell you are running on UNIX system?
You can do the Echo $RANDOM. It will return a undefined variable if you are from the
C-Shell, just a return prompt if you are from the Bourne shell, and a 5 digit random

numbers if you are from the Korn shell. You could also do a ps -l and look for the
shell with the highest PID.
Describe PRIVATE, PROTECTED and PUBLIC – the differences and give examples.
class Point2D{
int x; int y;
public int color;
protected bool pinned;
};
Point2D MyPoint;
You cannot directly access private data members when they are declared (implicitly)
private:
MyPoint.x = 5; // Compiler will issue a compile ERROR
//Nor yoy can see them:
int x_dim = MyPoint.x; // Compiler will issue a compile ERROR
On the other hand, you can assign and read the public data members:
MyPoint.color = 255; // no problem
int col = MyPoint.color; // no problem
With protected data members you can read them but not write them: MyPoint.pinned
= true; // Compiler will issue a compile ERROR
bool isPinned = MyPoint.pinned; // no problem

What is namespace?
Namespaces allow us to group a set of global classes, objects and/or functions under
a name. To say it somehow, they serve to split the global scope in sub-scopes known
as namespaces.
The form to use namespaces is:
namespace identifier { namespace-body }
Where identifier is any valid identifier and namespace-body is the set of classes,
objects and functions that are included within the namespace. For example:
namespace general { int a, b; } In this case, a and b are normal variables integrated
within the general namespace. In order to access to these variables from outside the
namespace we have to use the scope operator ::. For example, to access the
previous variables we would have to put:
general::a general::b
The functionality of namespaces is specially useful in case that there is a possibility
that a global object or function can have the same name than another one, causing a
redefinition error.
What do you mean by inheritance?
Inheritance is the process of creating new classes, called derived classes, from
existing classes or base classes. The derived class inherits all the capabilities of the
base class, but can add embellishments and refinements of its own.
What is a COPY CONSTRUCTOR and when is it called?
A copy constructor is a method that accepts an object of the same class and copies
it’s data members to the object on the left part of assignement:
class Point2D{
int x; int y;
public int color;
protected bool pinned;
public Point2D( const Point2D & ) ;
};
Point2D::Point2D( const Point2D & p )
{
this->x = p.x;

this->y = p.y;
this->color = p.color;
this->pinned = p.pinned;
}
main(){
Point2D MyPoint;
MyPoint.color = 345;
Point2D AnotherPoint = Point2D( MyPoint ); // now AnotherPoint has color = 345
What is Boyce Codd Normal form?
A relation schema R is in BCNF with respect to a set F of functional dependencies if
for all functional dependencies in F+ of the form a-> , where a and b is a subset of
R, at least one of the following holds:
* a- > b is a trivial functional dependency (b is a subset of a)
* a is a superkey for schema R
What is virtual class and friend class?
Friend classes are used when two or more classes are designed to work together and
need access to each other's implementation in ways that the rest of the world
shouldn't be allowed to have. In other words, they help keep private things private.
For instance, it may be desirable for class DatabaseCursor to have more privilege to
the internals of class Database than main() has.
What is the word you will use when defining a function in base class to allow this
function to be a polimorphic function?
virtual
What do you mean by binding of data and functions?
Encapsulation.

What are 2 ways of exporting a function from a DLL?
1.Taking a reference to the function from the DLL instance.
2. Using the DLL ’s Type Library
What is the difference between an object and a class?
Classes and objects are separate but related concepts. Every object belongs to a
class and every class contains one or more related objects.
- A Class is static. All of the attributes of a class are fixed before, during, and after
the execution of a program. The attributes of a class don't change.
- The class to which an object belongs is also (usually) static. If a particular object
belongs to a certain class at the time that it is created then it almost certainly will
still belong to that class right up until the time that it is destroyed.
- An Object on the other hand has a limited lifespan. Objects are created and
eventually destroyed. Also during that lifetime, the attributes of the object may
undergo significant change.
Suppose that data is an array of 1000 integers. Write a single function call
that will sort the 100 elements data [222] through data [321].
quicksort ((data + 222), 100);
What is a class?
Class is a user-defined data type in C++. It can be created to solve a particular kind
of problem. After creation the user need not know the specifics of the working of a
class.
What is friend function?
As the name suggests, the function acts as a friend to a class. As a friend of a class,
it can access its private and protected members. A friend function is not a member of
the class. But it must be listed in the class definition.
Which recursive sorting technique always makes recursive calls to sort
subarrays that are about half size of the original array?
Mergesort always makes recursive calls to sort subarrays that are about half size of
the original array, resulting in O(n log n) time.
What is abstraction?
Abstraction is of the process of hiding unwanted details from the user.

What are virtual functions?
A virtual function allows derived classes to replace the implementation provided by
the base class. The compiler makes sure the replacement is always called whenever
the object in question is actually of the derived class, even if the object is accessed
by a base pointer rather than a derived pointer. This allows algorithms in the base
class to be replaced in the derived class, even if users don't know about the derived
class.
What is the difference between an external iterator and an internal iterator?
Describe an advantage of an external iterator.
An internal iterator is implemented with member functions of the class that has
items to step through. .An external iterator is implemented as a separate class that
can be "attach" to the object that has items to step through. .An external iterator
has the advantage that many difference iterators can be active simultaneously on
the same object.
What is a scope resolution operator?
A scope resolution operator (::), can be used to define the member functions of a
class outside the class.
What do you mean by pure virtual functions?
A pure virtual member function is a member function that the base class forces
derived classes to provide. Normally these member functions have no
implementation. Pure virtual functions are equated to zero.
class Shape { public: virtual void draw() = 0; };
What is polymorphism? Explain with an example?
"Poly" means "many" and "morph" means "form". Polymorphism is the ability of an
object (or reference) to assume (be replaced by) or become many different forms of
object.
Example: function overloading, function overriding, virtual functions. Another
example can be a plus ‘+’ sign, used for adding two integers or for using it to
concatenate two strings.
How can you quickly find the number of elements stored in a a) static array
b) dynamic array ?
Why is it difficult to store linked list in an array?
How can you find the nodes with repetetive data in a linked list?
Write a prog to accept a given string in any order and flash error if any of the
character is different. For example : If abc is the input then abc, bca, cba, cab bac
are acceptable but aac or bcd are unacceptable.
Write out a function that prints out all the permutations of a string. For example, abc

would give you abc, acb, bac, bca, cab, cba. You can assume that all the characters
will be unique.
What’s the output of the following program? Why?
#include
main()
{
typedef union
{
int a;
char b[10];
float c;
}
Union;
Union x,y = {100};
x.a = 50;
strcpy(x.b,"hello");
x.c = 21.50;
printf("Union x : %d %s %f n",x.a,x.b,x.c );
printf("Union y :%d %s%f n",y.a,y.b,y.c);
}
Given inputs X, Y, Z and operations | and & (meaning bitwise OR and AND,
respectively)
What is output equal to in
output = (X & Y) | (X & Z) | (Y & Z)
Why are arrays usually processed with for loop?
The real power of arrays comes from their facility of using an index variable to
traverse the array, accessing each element with the same expression a[i]. All the is
needed to make this work is a iterated statement in which the variable i serves as a
counter, incrementing from 0 to a.length -1. That is exactly what a loop does.
What is an HTML tag?
Answer: An HTML tag is a syntactical construct in the HTML language that
abbreviates specific instructions to be executed when the HTML script is loaded into a
Web browser. It is like a method in Java, a function in C++, a procedure in Pascal, or
a subroutine in FORTRAN.
Explain which of the following declarations will compile and what will be
constant - a pointer or the value pointed at: * const char *

* char const *
* char * const
Note: Ask the candidate whether the first declaration is pointing to a string or a
single character. Both explanations are correct, but if he says that it’s a single
character pointer, ask why a whole string is initialized as char* in C++. If he says
this is a string declaration, ask him to declare a pointer to a single character.
Competent candidates should not have problems pointing out why const char* can
be both a character and a string declaration, incompetent ones will come up with
invalid reasons.
You’re given a simple code for the class BankCustomer. Write the following
functions:
* Copy constructor
* = operator overload
* == operator overload
* + operator overload (customers’ balances should be added up, as an
example of joint account between husband and wife)
Note:Anyone confusing assignment and equality operators should be dismissed from
the interview. The applicant might make a mistake of passing by value, not by
reference. The candidate might also want to return a pointer, not a new object, from
the addition operator. Slightly hint that you’d like the value to be changed outside
the function, too, in the first case. Ask him whether the statement customer3 =
customer1 + customer2 would work in the second case.
What problems might the following macro bring to the application?
#define sq(x) x*x
Anything wrong with this code?
T *p = new T[10];
delete p;
Everything is correct, Only the first element of the array will be deleted”, The entire
array will be deleted, but only the first element destructor will be called.
Anything wrong with this code?
T *p = 0;
delete p;
Yes, the program will crash in an attempt to delete a null pointer.
How do you decide which integer type to use?
It depends on our requirement. When we are required an integer to be stored in 1
byte (means less than or equal to 255) we use short int, for 2 bytes we use int, for 8
bytes we use long int.

A char is for 1-byte integers, a short is for 2-byte integers, an int is generally a 2-
byte or 4-byte integer (though not necessarily), a long is a 4-byte integer, and a
long long is a 8-byte integer.
What’s the best way to declare and define global variables?
The best way to declare global variables is to declare them after including all the files
so that it can be used in all the functions.
What does extern mean in a function declaration?
Using extern in a function declaration we can make a function such that it can used
outside the file in which it is defined.
An extern variable, function definition, or declaration also makes the described
variable or function usable by the succeeding part of the current source file. This
declaration does not replace the definition. The declaration is used to describe the
variable that is externally defined.
If a declaration for an identifier already exists at file scope, any extern declaration of
the same identifier found within a block refers to that same object. If no other
declaration for the identifier exists at file scope, the identifier has external linkage.
What can I safely assume about the initial values of variables which are not
explicitly initialized?
It depends on complier which may assign any garbage value to a variable if it is not
initialized.
What is the difference between char a[] = “string”; and char *p = “string”;?
In the first case 6 bytes are allocated to the variable a which is fixed, where as in the
second case if *p is assigned to some other value the allocate memory can change.
What’s the auto keyword good for?
Answer1
Not much. It declares an object with automatic storage duration. Which means the
object will be destroyed at the end of the objects scope. All variables in functions
that are not declared as static and not dynamically allocated have automatic storage
duration by default.
For example
int main()
{
int a; //this is the same as writing “auto int a;”
}
Answer2

Local variables occur within a scope; they are “local” to a function. They are often
called automatic variables because they automatically come into being when the
scope is entered and automatically go away when the scope closes. The keyword
auto makes this explicit, but local variables default to auto auto auto auto so it is
never necessary to declare something as an auto auto auto auto.
What is the difference between char a[] = “string”; and char *p = “string”;
?
Answer1
a[] = “string”;
char *p = “string”;
The difference is this:
p is pointing to a constant string, you can never safely say
p[3]=’x';
however you can always say a[3]=’x';
char a[]=”string”; - character array initialization.
char *p=”string” ; - non-const pointer to a const-string.( this is permitted only in the
case of char pointer in C++ to preserve backward compatibility with C.)
Answer2
a[] = “string”;
a[] will have 7 bytes. However, p is only 4 bytes. P is pointing to an adress is either
BSS or the data section (depending on which compiler — GNU for the former and CC
for the latter).
Answer3
char a[] = “string”;
for char a[]…….using the array notation 7 bytes of storage in the static memory block
are taken up, one for each character and one for the terminating nul character.
But, in the pointer notation char *p………….the same 7 bytes required, plus N bytes to
store the pointer variable “p” (where N depends on the system but is usually a
minimum of 2 bytes and can be 4 or more)……
How do I declare an array of N pointers to functions returning pointers to
functions returning pointers to characters?
Answer1
If you want the code to be even slightly readable, you will use typedefs.
typedef char* (*functiontype_one)(void);
typedef functiontype_one (*functiontype_two)(void);
functiontype_two myarray[N]; //assuming N is a const integral
Answer2

char* (* (*a[N])())()
Here a is that array. And according to question no function will not take any
parameter value.
What does extern mean in a function declaration?
It tells the compiler that a variable or a function exists, even if the compiler hasn’t
yet seen it in the file currently being compiled. This variable or function may be
defined in another file or further down in the current file.
How do I initialize a pointer to a function?
This is the way to initialize a pointer to a function
void fun(int a)
{
}
void main()
{
void (*fp)(int);
fp=fun;
fp(1);
}
How do you link a C++ program to C functions?
By using the extern "C" linkage specification around the C function declarations.
Explain the scope resolution operator.
It permits a program to reference an identifier in the global scope that has been
hidden by another identifier with the same name in the local scope.
What are the differences between a C++ struct and C++ class?
The default member and base-class access specifiers are different.
How many ways are there to initialize an int with a constant?
Two.
There are two formats for initializers in C++ as shown in the example that follows.
The first format uses the traditional C notation. The second format uses constructor
notation.

int foo = 123;
int bar (123)
How does throwing and catching exceptions differ from using setjmp and
longjmp?
The throw operation calls the destructors for automatic objects instantiated since
entry to the try block.
What is a default constructor?
Default constructor WITH arguments class B { public: B (int m = 0) : n (m) {} int n;
}; int main(int argc, char *argv[]) { B b; return 0; }
What is a conversion constructor?
A constructor that accepts one argument of a different type.
What is the difference between a copy constructor and an overloaded
assignment operator?
A copy constructor constructs a new object by using the content of the argument
object. An overloaded assignment operator assigns the contents of an existing object
to another existing object of the same class.
When should you use multiple inheritance?
There are three acceptable answers: "Never," "Rarely," and "When the problem
domain cannot be accurately modeled any other way."
Explain the ISA and HASA class relationships. How would you implement
each in a class design?
A specialized class "is" a specialization of another class and, therefore, has the ISA
relationship with the other class. An Employee ISA Person. This relationship is best
implemented with inheritance. Employee is derived from Person. A class may have
an instance of another class. For example, an employee "has" a salary, therefore the
Employee class has the HASA relationship with the Salary class. This relationship is
best implemented by embedding an object of the Salary class in the Employee class.
When is a template a better solution than a base class?
When you are designing a generic class to contain or otherwise manage objects of
other types, when the format and behavior of those other types are unimportant to
their containment or management, and particularly when those other types are
unknown (thus, the genericity) to the designer of the container or manager class.

What is a mutable member?
One that can be modified by the class even when the object of the class or the
member function doing the modification is const.
What is an explicit constructor?
A conversion constructor declared with the explicit keyword. The compiler does not
use an explicit constructor to implement an implied conversion of types. It’s purpose
is reserved explicitly for construction.
What is the Standard Template Library (STL)?
A library of container templates approved by the ANSI committee for inclusion in the
standard C++ specification.
A programmer who then launches into a discussion of the generic programming
model, iterators, allocators, algorithms, and such, has a higher than average
understanding of the new technology that STL brings to C++ programming.
In C++, what is the difference between method overloading and method
overriding?
Overloading a method (or function) in C++ is the ability for functions of the same
name to be defined as long as these methods have different signatures (different set
of parameters). Method overriding is the ability of the inherited class rewriting the
virtual method of the base class.
What methods can be overridden in Java?
In C++ terminology, all public methods in Java are virtual. Therefore, all Java
methods can be overwritten in subclasses except those that are declared final, static,
and private.
What are the defining traits of an object-oriented language?
The defining traits of an object-oriented langauge are:
* encapsulation
* inheritance
* polymorphism
Write a program that ask for user input from 5 to 9 then calculate the
average
int main()
{
int MAX=4;

int total =0;
int average=0;
int numb;
cout<<"Please enter your input from 5 to 9";
cin>>numb;
if((numb <5)&&(numb>9))
cout<<"please re type your input";
else
for(i=0;i<=MAX; i++)
{
total = total + numb;
average= total /MAX;
}
cout<<"The average number is"<<
return 0;
}
Can you be bale to identify between Straight- through and Cross- over cable
wiring? and in what case do you use Straight- through and Cross-over?
Straight-through is type of wiring that is one to connection, Cross- over is type of
wiring which those wires are got switched
We use Straight-through cable when we connect between NIC Adapter and Hub.
Using Cross-over cable when connect between two NIC Adapters or sometime
between two hubs.
If you hear the CPU fan is running and the monitor power is still on, but you
did not see any thing show up in the monitor screen. What would you do to
find out what is going wrong?
I would use the ping command to check whether the machine is still alive(connect to
the network) or it is dead.
Assignment Operator - What is the diffrence between a "assignment
operator" and a "copy constructor"?
Answer1.
In assignment operator, you are assigning a value to an existing object. But in copy
constructor, you are creating a new object and then assigning a value to that object.
For example:
complex c1,c2;
c1=c2; //this is assignment
complex c3=c2; //copy constructor

Answer2.
A copy constructor is used to initialize a newly declared variable from an existing
variable. This makes a deep copy like assignment, but it is somewhat simpler:
There is no need to test to see if it is being initialized from itself.
There is no need to clean up (eg, delete) an existing value (there is none).
A reference to itself is not returned.
"mutable" Keyword - What is "mutable"?
Answer1.
"mutable" is a C++ keyword. When we declare const, none of its data members can
change. When we want one of its members to change, we declare it as mutable.
Answer2.
A "mutable" keyword is useful when we want to force a "logical const" data member
to have its value modified. A logical const can happen when we declare a data
member as non-const, but we have a const member function attempting to modify
that data member. For example:
class Dummy {
public:
bool isValid() const;
private:
mutable int size_ = 0;
mutable bool validStatus_ = FALSE;
// logical const issue resolved
};
bool Dummy::isValid() const
// data members become bitwise const
{
if (size > 10) {
validStatus_ = TRUE; // fine to assign
size = 0; // fine to assign
}
}
Answer2.
"mutable" keyword in C++ is used to specify that the member may be updated or
modified even if it is member of constant object. Example:
class Animal {
private:
string name;
string food;
mutable int age;
public:
void set_age(int a);

};
void main() {
const Animal Tiger(â€™Fulffyâ€™,'antelopeâ€™,1);
Tiger.set_age(2);
// the age can be changed since its mutable
}
RTTI - What is RTTI?
Answer1.
RTTI stands for "Run Time Type Identification". In an inheritance hierarchy, we can
find out the exact type of the objet of which it is member. It can be done by using:
1) dynamic id operator
2) typecast operator
Answer2.
RTTI is defined as follows: Run Time Type Information, a facility that allows an
object to be queried at runtime to determine its type. One of the fundamental
principles of object technology is polymorphism, which is the ability of an object to
dynamically change at runtime.
STL Containers - What are the types of STL containers?
There are 3 types of STL containers:
1. Adaptive containers like queue, stack
2. Associative containers like set, map
3. Sequence containers like vector, deque
Bitwise Operations - Given inputs X, Y, Z and operations | and & (meaning
bitwise OR and AND, respectively), what is output equal to in?
output = (X & Y) | (X & Z) | (Y & Z);
Customer is king Inc
http://customeriskinginc.com

C++ Interview Question And Answer

More Related Content

What's hot

Viewers also liked

Similar to C++ Interview Question And Answer

Recently uploaded

C++ Interview Question And Answer